Alpine DVA-5205 owner manual Loading and unloading discs, Loading discs, Unloading discs

Page 9

Loading and unloading discs

Loading and unloading discs

DVD Video CD

CD

Turn on the power before loading and unloading discs. (Refer to page 10 “Turning the power on and off”.)

Loading discs

Press the door in gently then slide it downwards.

Close the door.

Be sure to close the door to prevent dust from getting inside.

POWER

OPEN

DVD

Insert the disc with the side containing words or diagrams facing upwards.

Once the disc is partially inserted, it is drawn in automatically. Playback starts.

DVD

POWER

OPEN

DVD

Unloading discs

Press the door in gently then slide it downwards. The disc is automatically ejected part way.

If the disc is not removed, it is automati- cally drawn back into the player after a while.

Notes:

If the ignition key is on ACC or ON, a disc can be inserted even when the power is OFF. The power then goes ON automatically.

Never insert a navigation map disc. If inserted it may cause a failure.

For two-sided DVDs, play one side of the disc to the end, then unload the disc, turn it over and reload it to play the other side.

Refer to the indications on the disc (“Side 1”/”Side 2”).

Never insert map discs for navigation purposes as they could damage the equipment.

If wrong disc, upside-down discs or dirty discs have been inserted, “DISC ERROR” is displayed. Open the door and remove the disc.

POWER

OPEN

DVD

Note: If the ignition key is on ACC or ON, a disc can be removed even when the power is OFF. After removing the disc, the power goes OFF again automatically.

Caution

Never close the door while the disc

 

is being unloaded. Doing so could

 

scratch the disc or damage the

 

player.

9

Image 9
Contents DVA-5205 Precautions Precautions Temperature Contents About DVDs About DVDsCD-ROMs DVDsDiscs playable on this DVD player Discs playable on this DVD playerWhen using remote control When using remote controlReplacing the batteries Loading and unloading discs Loading and unloading discsLoading discs Unloading discsTurning the power on and off Turning the power on and offAdjusting the volume Press NTSC/PAL for at least 5 secondsMove the rotary encoder to the right or left Playing discs Playing discsPress If a menu screen appearsStopping PlaybackStopping playback Fast-reversing During playbackPress c or f Frame-by-frame Frames pausingPlaying still Slow motionSearching by title NumberSearching by title number Searching directly by chapter or track number When chapter number 12 is inputPress or ENT Playback starts from the selected title numberSearching by Elapsed timeSearching by elapsed time Switching Audio languageChapter/track/ DVD Video CD Title repeat playback Switching Switching the angle DVDSubtitles subtitle Language During playback, press Angle for at least SecondsSubtitles DisplayingDisc status Displaying the subtitles Displaying the disc statusDisplaying the disc status DispPlayback status is displayed Video output ON/OFF Video output ON/OFFConnected To release, press V.OUT for at least 2 secondsSET for at least Stop mode, pressUse the Joystick to make the selection, then press ENT Description SeeChanging the language settings Setup screen for the selected language is displayedPress SET for at least 2 seconds Make the selection Changing the TV screen settingsThen press ENT LetterboxChanging the country code setting Changing the country code settingPress ENT to reset the country code Use keys 0 to 9 to input Digit country code, then press ENTUse keys 0 to 9 to input the 4- digit password Setting the rating level parental lockPassword input mode is set Password is set to 1111 is upon shipment from the factoryRating level, then press ENT Use the Joystick to selectOFF Changing the down sampling settingSET UP Changing the digital output setting Changing the digital output settingLpcm Audio output/Optical digital audio output Set up are stored and the set up mode is canceledIndicator setting Changing the LED indicator settingChanging the LED Custom setting Changing the Closed Caption setting Custom setting Changing the Closed Caption SET UPPress SET for at Displays the closed captionsCustom setting Changing the Ai-NET settings Custom setting Changing the Ai-NET settingsUse the Joystick to select Ai- NET SETUP, then press ENT Use the Joystick to select DVD or CD, then press ENTDVD Custom setting Changing the Ai-NET settings SET UPCustom setting Changing the H.U. Control settings Custom setting Changing the H.U Control settingsSelect Custom Setup under Custom setting Changing the H.U. Control settings SET UP Digital audio Processor optional OperatingOperating the digital audio processor optional Press A.PROCAdjusting the parametric equalizer Use the Joystick to adjust the level LV, then press ENT Adjusting the surround settingsThere are six surround modes Press ENT. The level LV value turns Yellow.ENTStoring the surround settings Surround settingsUse the Joystick to adjust the time, then press ENT StoringRecalling Recalling the surround settingsUsing the Pro AdjustingLogic mode Adjusting the time compensation Using the Pro Logic modeAdjust Setting the speaker mode Setting Speaker modeUse the Joystick to switch the mode Front LARGE/SMALL Center OFF/LARGE/SMALL RearAdjusting Acoustic image Adjust Adjusting the acoustic imageUse the Joystick to select the level item, then press ENT Mixing the rear Audio channels Adjust Mixing the rear audio channelsUse the Joystick to adjust Adjust Center speaker time compensationCenter speaker Time compensationRear speaker time compensation Adjust Rear speaker time compensationAdjust Achieving powerful sound at low volumes Achieving powerful Sound at low volumesUse the Joystick to select LISTENING, then press ENT Adjust Adjusting the speaker level Adjusting Speaker levelUse the Joystick to select Test TONE, then press ENT Use the Joystick to select ON, then press ENTMode Adjusting the volume, fader and balance Adjusting the volume, CD fader and balanceUse the Joystick to select the speaker, then press ENT Mode Adjusting the subwoofer Adjusting SubwooferMode Turning the defeat function on and off Turning the defeat function on and offOn The response is flat OFF Off Operating from the head unit Press Source and select CD DVA-5205 modeOperating from the head unit To set the pause mode, pressSwitch Operation Press Title on the head unitDisplay pattern changes each time the button is pressed Operating from the head unit’s remote control unit Operating from the head unit’s remote control unitRUE-4185 RUE-4160 RUE-4165 Unit Operation Press Source , Audio SEL or A. SELto set the CD DVA-5205 ModeTo set the pause mode, press Or ENT Terminology TerminologyList of language codes List of language codesFor details, see List of language codes List of country codes List of country codesList of country codes List of country codes Case of difficulty Symptom Cause RemedySpecifications DVD 5 Hz to 22 kHz ±1 dB 48 kHz samplingDVD 5 Hz to 44 kHz ±1 dB 96 kHz sampling Operating the DVA-5205 DVD Video Player Functions of remote control unit buttonsDVD/AUDIO Switch Power ButtonRPT Button NTSC/PAL ButtonOperating audio for the Alpine Ai-NET Memo Alpine Electronics DE ESPAÑA, S.A