VBR338
Adjusting the Network Settings
In order to access
To access the Network menu:
1.Turn on the player and your TV. Use the Arrow buttons on the remote to highlight Settings and press OK.
The Settings menu is displayed.
2.Use the Arrow buttons on the remote to highlight Network and press OK.
The Network
4
Adjusting the Wired Settings
If your player is connected to your home network with an ethernet cable, the player will automatically detect the connection. You can manually adjust the settings, but VIZIO recommends this for advanced users only.
To adjust the wired settings:
1.From the Network Menu, use the Arrow buttons on the remote to highlight Wired and press OK.
The Wired menu is displayed.
2.Use the Arrow buttons on the remote to highlight IP Mode and press OK.
Use the Arrow buttons to select Off, Dynamic, or Manual and press OK.
To change the individual IP settings, IP Mode must be set to Manual.
3.Use the Arrow and OK buttons on the remote to change each of the IP Mode settings:
•IP Address
•Subnet Mask
•Gateway
•Primary DNS
•Secondary DNS
If you are unsure what values to enter, contact your Internet Service Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.
29