Vizio VBR135 warranty

Page 23

Adjusting the Aspect Ratio

If video displayed from the player appears distorted or otherwise incorrect, you may need to adjust the aspect ratio of the player to match that of your TV. (Devices differ; see your TV’s user manual to determine its aspect ratio.)

To adjust the aspect ratio:

1.From the Display menu, use the Up/Down Arrow buttons on the remote to highlight Output to TV and press OK. Then highlight TV Screen and press OK.

2.Highlight the aspect ratio that most closely matches that of your TV and press OK:

16:9 Full - Use this setting if you have a “widescreen” television. When using this setting, video formatted in 4:3 will be stretched horizontally to fit the screen.

16:9 Normal - Use this setting if you have a “widescreen” television. When using this setting, video formatted in 4:3 will be displayed in the center of the screen. Vertical bars will be displayed on the left and right edges of the picture.

4:3 Pan&Scan - Use this setting if you have a “traditional” screen (nearly square). When using this setting, movies in widescreen format will be centered and the left and right edges of the picture may be cut off.

4:3 Letterbox - Use this setting if you have a “traditional” screen (nearly square). When using this setting, movies in widescreen format will be fully displayed, with black bars on the top and bottom of the picture.

4

Activating Film Mode

Movies are recorded on film at a rate of 24 pictures, or frames, per second. Many of the movies on Blu-ray discs are formatted at this frame rate (24 frames/second). However, not all TVs can display this format.

If your TV is capable of displaying 24 frames/second, you can activate Film Mode for a better viewing experience.

To activate/deactivate Film Mode:

1.From the Display menu, use the Up/Down Arrow buttons on the remote to highlight Output to TV and press OK. Then highlight HDMI 1080p 24Hz then press OK.

2.Highlight On or Off and press OK.

Adjusting the Deep Color Setting

The player is capable of outputting 36-bit color over HDMI. For the best viewing experience, the deep color setting should be adjusted to match your TVs display capabilities.

To adjust the Deep Color setting:

1.From the Display menu, use the Up/Down Arrow buttons on the remote to highlight HDMI Deep Color and press OK.

2.Highlight the highest color setting that your TV can display. (Devices differ; see your TV’s user manual for details.)

18

Image 23
Contents User Guide Page Welcome Important Safety InstructionsPage Important Safety Information for Viewing 3D Content Table of Contents Table of Contents Connecting the player to your tv Installing the Blu-ray PlayerInspecting the Package Contents Connecting the player to an electrical outletHome Audio Connection Chart Connecting the player to your home audio systemHdmi OUT Hdmi Connection ChartSetting Up Your Network Connection Setting up your network connectionPage Front Panel Controls and ConnectionsFront Panel Rear Panel Rear PanelRemote Control Remote ControlReplacing Batteries On-Screen Menu Basic OperationBasic Playback Buttons Advanced Playback Viewing USB Media Audio and ImagesUSB Playback Buttons PowerPage Adjusting the Display Settings Adjusting the Player’s SettingsPage Adjusting the Audio Settings Page Changing Language settings Bd-live storage Using disc playback memorySetting the Parental Controls Not all discs have parental controls enabled Changing the System Settings Page Adjusting the Network Settings Page Viewing the Info Screen Using the Vudu App Using Internet AppsUsing the Netflix App Using the Hulu Plus App Using the Pandora AppLET US Help Troubleshooting & Technical SupportPage DTS SpecificationsOn Parts and Labor Limited WarrantyLegal & Compliance Software is Provided AS IS, Without Warranty of ANY Kind Page Page Vizio INC. All rights reserved OC-NC