Basic Operation
Turn the Unit On
1.Turn the car ignition on to the accessory posi- tion.
2.Press the POWER 
button.
Loading a DVD/CD Disc
1.Insert the disc with printed side facing up into the disc slot. The player will automati- cally search the disc.
2.The player starts playback automatically.
Ejecting a Disc
Press the 
EJECT button to eject disc.
Standby State
1.With the unit on, press POWER 
on the remote.
2.In Standby State, press POWER 
on the remote, again to recall playback.
3.To cancel Standby State, press POWER 
on the unit's front panel.
Note: For Screen Saver mode select “On” in Screen Saver setup. The screen saver will automatically activate when playback is stopped or paused and there is no button oper- ation for 5 minutes. Screen saver mode will release automatically when a disc is played. After 5 minutes, if the unit is not operated while in screen saver mode, it will enter stand- by state.
Power | Disc Slot | Eject |
Button |
| Button |
BASIC PLAY
Stopping Play
Press the ν STOP button to stop the disc
playback. Press the 
PLAY button on the remote will continue with normal playback.
Press the ν STOP button twice, to stop the playback and go back to initial Track/Chapter.
Pause (still picture)
Press PAUSE 
during playback on the remote
to stop play temporarily. Press PLAY 
on remote to return to normal playback.
Rapid Forward/Rapid Reverse
Press FF 
and REW
during play. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follows:
DVD:
Normal Playback 
2X 
4X 
6X 
8X 
CD/MP3:
Normal Playback 
2X 
4X 
16X 
100X 
Slow Motion Play (DVD Only)
Press SLOW 
on the remote control dur- ing playback. Each time the button is pressed, the slow mode is changed according to the disc as follows:
DVD:
Normal Playback 
2X 
4X 
8X 
14