Troubleshooting
Only qualified service personnel can remove the cover or service this player. Otherwise the warranty will become invalid.
No Power:
•Check to see if the player is set to “On”.
•Check to see that the power plug of the main unit is properly connected.
•Check to see if that power to the outlet is properly working.
No Picture:
•Check to see that the monitor is switched to “On”.
•Check that the correct Mode is selected (DVD or AV) by pushing the MODE button.
•Check the video connection.
Distorted Picture:
•Check the disc for fingerprints and clean with soft dry cloth, wiping from center to edge.
•A small amount of picture distortion may appear. This may not be a malfunction.
Completely Distorted Picture:
The disc format is not according to the monitor used (PAL/NTSC).
No Color in Picture:
The disc format is not according to the monitor used (PAL/NTSC).
No Sound:
•Check audio connections.
•If using a
Disc Does Not Play:
•Ensure the disc label is facing upwards.
•Clean the disc.
•Check to see if the disc is defective by trying another disc.
No Return to Start-Up Screen when Disc is Removed:
•Press POWER to turn “Off” the unit, then press it again to turn “On” the unit.
•Press RESET button “On” the front of the DVD unit.
The Player Does Not Respond to the Remote Control:
•Aim the remote control directly at the sensor on the front of the housing.
•Avoid all obstacles which may interfere with the signal path.
•Inspect or replace the remote control batter- ies.
Buttons Do Not Work:
•Press POWER to turn “Off” the unit, then press it again to turn “On” the unit.
DVD player showing “REGION ERROR”:
•The DVD player and the discs all have a “REGION CODE”. If the region number on the disc does not correspond to the region num- ber of the DVD player the unit cannot play the disc.
21