Software Operation using London Architect

6 Software Operation using London Architect™

NOTE: While it is possible to use a WIFI access point to control and configure the SDEC we do not recommend using this method for initial setup when using London Architect. For the most reliable connection it is highly recommended that you use a wired connection.

6.1 London Architect™ Software Setup

If this is the first time you are using the London Architect™ Software you will need to open the IP properties and make sure your computer is ready to connect to the SDEC.

Open the London Architect software from your Start menu All Programs. Go to Tools Application Preferences HiQnet. Use Passive FTP should be checked and the correct Network Interface Card should be checked. All other settings should be left at the default

Figure 6.

6.1.1Network Control Panel

Open London Architect first. Make sure you are connected to the same network and subnet as the SDEC. You should see the unit(s) appear under the Network control panel listed within the Ethernet node. If you cannot see the Network control panel go to View Network. If you cannot see the unit(s) you should first check all network settings and connections. Please check the troubleshooting section for more details.

View this Network panel to see the attached devices.

Figure 7.

6.2 Initial Software Connection to the

SDEC

If you are using SDEC-3000 or SDEC-4000 file version 1.0 of higher the software will automatically attempt to connect. The software automatically checks the hardware and updates any of the following to the latest version.

•Firmware

•HiQnet Address

•Design configuration

•Parameter synchronization

NOTE: If the Firmware or HiQnet address needs to be updated the unit will need to be rebooted and the software will not be able to automatically connect. In this case you will need to manually select ONLINE. Please see the diagram below for instructions.

Click here to manually select “ONLINE” mode and begin controlling the SDEC-3000 or SDEC- 4000.

Figure 8.

6.2.1Open from a design file

Once you have confirmed that the unit(s) can be “seen” by the software go to File Open navigate to the proper design file which will be an SDEC_xxxx .architect file. You should receive it from JBL Synthesis Technical Support via e-mail. If you do

- 10 -

SDEC -X000 DACS Calibration Manual v1.0.doc

SDEC-4000, SDEC-3000 specifications

The JBL SDEC-4000 is an advanced digital signal processor designed for professional audio applications, offering a range of features tailored for optimizing sound quality in both live and installation settings. This powerful device is equipped with cutting-edge technologies that elevate the audio experience through precise control and manipulation of audio signals.

One of the standout features of the SDEC-4000 is its high-performance 32-bit DSP engine, which allows for complex audio processing tasks to be executed seamlessly. This means sound engineers can utilize precise adjustments without any degradation in audio quality. The processor supports various crossover types, making it versatile for different speaker configurations and ensuring proper frequency distribution across audio systems.

The SDEC-4000 comes with comprehensive networking capabilities, supporting both Ethernet and USB connections. This enables easy integration into larger systems while allowing for remote control and monitoring via a user-friendly interface. The device also supports various audio protocols, including AES/EBU and analog inputs, providing flexibility for connecting with multiple sources.

A vital aspect of the SDEC-4000 is its extensive array of built-in algorithms for equalization, compression, limiting, and delay. These tools empower sound engineers to tailor the audio output precisely to their requirements, whether it’s for a concert, a theater production, or a permanent audio installation. With up to 20 channels of processing, users have the freedom to fine-tune each element of their sound system individually.

In addition, the SDEC-4000 features a robust and intuitive graphical user interface that simplifies programming and adjustments. Users can visually represent their audio setups, making it easier to manage complex configurations. The processor also includes comprehensive diagnostic tools, ensuring that any issues can be quickly identified and resolved, thereby maintaining optimal performance.

Furthermore, the device is built with durability in mind. Its rugged construction ensures reliability even in demanding environments, making it a trustworthy choice for both touring applications and fixed installations. The JBL SDEC-4000 is not just a technical marvel, but a comprehensive solution designed to meet the diverse needs of audio professionals, setting a new standard in digital signal processing technology.