POWER SUPPLY
You can power this portable DVD player by connecting the AC adaptor or by the rechargeable battery (both included).
A. Using the AC adaptor
This player is supplied with an AC adapter for powering the unit and charging the battery. Insert the AC adaptor plug to the DC IN jack on the portable DVD player and connect the adaptor to a wall outlet.
B. Using the rechargeable battery
The rechargeable battery pack is suitable for portable use and when it is convenient for you to enjoy the unique functions of the unit outdoors.
Remember to charge the battery fully before initial use.
Attaching the Battery
Refer to the following steps for attaching the battery:
1.Make sure the player is off and the AC adapter is disconnected.
2.Place the DVD player on a soft and smooth surface with the bottom of the unit facing up.
3.With one hand on the DVD player to prevent it from moving, take the battery and align the plastic tabs on the battery with slots on the player, and slide it forward to lock, The battery will click into place.
slot
slot 
Detaching the Battery
1. Make sure the player is off and the AC adapter is 
disconnected.
2.Push the tab on the battery down.
3.Slide and lift the battery out.
To charge the battery
2
3
tab
1.Insert the adaptor’s plug into the DC IN jack on the DVD player and connect the adaptor to a wall outlet. After 5 seconds, the battery LED indicator will turn on.
2.The battery LED indicator will flash when charging the battery and be steadily on when the battery is fully charged.
3.Charging time is about 5 hours. A fully charged battery delivers about 2.5 hours of use.
NOTE: When inserting the battery while the set is AC powered, the LED turn on is delayed by several seconds. This is because the battery charging circuit needs to reset and detect the battery status.
7 |
4/3/2006, 9:24 AM