
INITIAL SETTING
Setting the Downmix Audio Out
Downmix audio output setup allows you to select LT/RT or STEREO audio output mode.
1 In STOP mode, press the SETUP button on the
remote control, “ ” (System Setup) is selected.
2 Use button to highlight “
” (Audio Setup).
3 Press button and use
button to highlight “DOWNMIX”.
4 Press button and use
/
buttons to select “LT/RT” or “STEREO”.
AUDIO SETUP
DIGITAL OUT
DOWNMIX LT/RT
A B | STEREO |
| EXIT SETUP |
THE N OK
2 | Use | button to highlight “ | ” (Video Setup). |
3 | Press | button to highlight “VIDEO OUT”. | |
4 | Press | button and use / | buttons to select |
| “YUV” or |
| |
5 | Press the OK button to confirm. |
| |
6 | Press the SETUP button to exit the SETUP mode. |
| VIDEO SETUP | |
VIDEO OUT | YUV | |
|
| |
A B |
|
|
EXIT SETUP |
| |
TO SET PRESS | SETUP | THE N OK |
TO QUIT PRESS |
|
NOTE 1: YUV is a superior video standard. It can optimize the translation of the Video, Y means Luminance, U and V mean chrominance.
NOTE 2: If sound does not come out of your TV, try using other AUDIO INPUT jacks near the Video jacks and make sure jacks are plugged in.
14 |
7/5/2006, 10:24 AM