Remote Control Operation

Battery Installation

1. Push door tab to open the battery door.

Tips on Battery Use

•Reversing polarities will damage the batteries and possibly your REMOTE. Be sure to follow polarity ( + and –) as indicated.

•Do not mix different types batteries together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new ones.

•When not in use for an extended period of time (over 60 days) remove the batteries to prevent possible acid leakage or corrosion resulting in damage to your remote.

•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.

•Installation of batteries should only be done by an adult (for safety).

2.Insert 2 size “AAA” alkaline batteries (included) into the battery compartment according to the + and – markings inside the battery compartment.

Remote Control Operation Range

Point the REMOTE CONTROL unit from less than 20 feet from the remote control sensor and within about 600 of the front of the DVD player (not your TV set).

REMOTE SENSOR RANGE

30o 30o

Distance

within 20 feet

3. Push here to close the battery door.

Remember to point the

REMOTE CONTROL in the direction of the DVD player, not the TV set.

Tips on Remote Control Operation

•The operating distance may vary according to the brightness of the room.

•Do not point bright lights at the remote control sensor (like laser pointers).

•Do not place objects between the remote control unit and the remote control sensor.

8	IB-DVD1002 (AT)-WM-E-032706

IB-DVD1002(AT)-WM-E-032706.pmd 9

7/5/2006, 10:24 AM