Laser STB-HDM2000 user manual Important safety instructions

Page 2

STB-HDM2000 User Manual

Important safety instructions

Please read carefully and keep for future reference

CAUTION!

Do not open. Risk of electric shock! No parts can be repaired by the end-user. Only qualified personnel can repair and maintain this product.

If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales personnel.

Where to install the product

Place the product on a straight and stable place.

Do not place the product on carpet.

Do not place the product on top or another that may cause overheating (for example, a receiver or amplifier).

Do not place anything underneath the product (for example, CDs or magazines).

Proper ventilation

Place the product in a sufficiently-ventilated place to avoid overheating. Allow at least 10cm spacing at the back and top of the product, and 5cm spacing on both sides.

Do not place items such as newspapers, tablecloth, curtains, in front or the ventilating openings.

Do not expose the product to high temperatures, moisture, water and dust.

Do not place other items close to this product that may damage it (for example, an object containing water).

Electric supply

Please unplug the product in case of prolonged inactive use.

This product must be connected to a 230V~50Hz electrical supply.

2

Image 2
Contents STB-HDM2000 Important safety instructions Please read carefully and keep for future referenceTable of Contents IntroductionRear Panel Front Panel and Rear PanelFront Panel Remote Controller First time installation System SetupVideo Setting Audio LR Mode Audio SettingDisplay problem in Hdmi mode Screen RatioFavourites MenusSchedule record / Reminder Recording and program reminderRecord live TV Trouble shooting STB-HDM2000