Integra DPC-5.2 Optional Audio Connections, Digital connections, Making stereo audio connections

Page 16

Making Connections

Optional Audio Connections

This DVD Changer provides numerous ways to take full advantage of the digital multi-channel sound recorded on DVD and some CD media.

Be sure to set Digital Audio Out after connection using the setup menu explained in “Customizing the Settings” starting on page 30.

Digital connections

Make digital connections from the DVD Changer to an AV component that features digital input capability or one or more multi-channel audio decoders to realize the full cinematic experience made possible by the DVD format. This DVD Changer features optical and coaxial digital audio output jacks and can output Dolby Digital and DTS bitstreams as well as outputting standard PCM.

Make connections from the DIGITAL OUTPUT OPTICAL jack to the digital optical input jack on the AV component using an optical fiber cable (sold separately). Make connections from the DIGITAL OUTPUT COAXIAL jack to the digital coaxial input jack on the AV component using a coaxial cable (sold separately). It is not necessary to make more than one type of digital connection to a single component.

When you are making connections to an amplifier or receiver that has internal Dolby Digital or DTS decoding capabilities, set Digital Audio Out to “Dolby Digital” or “DTS” using the setup menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information.

When you are making connections to an amprifer or receiver that has digital input capabilities, but no internal decoder, set Digital Audio Out to “PCM” using the on-screen menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information. Setting Digital Audio Out to any other setting could result in digital noise being output that could cause harm your hearing and may also damage your speakers.

Notes

Refer to the instructions supplied with the AV component for details on what digital audio formats it is compatible with.

Even if digital audio connections are made, it is also recommended to make analog connections, because some conditions or media may prohibit digital audio output.

Coaxial cable (not supplied)

To digital

 

input (coaxial)

 

 

An amplifier or receiver with a

 

 

Optical cable (not supplied)

Dolby Digital or DTS decorder or

 

 

 

digital inputs

 

To digital

 

 

input (optical)

 

 

 

AC INLET

VIDEO OUTPUT

COMPONENT

PR

PB

RS 232

AUDIO

DIGITAL OUTPUT

DVD CHANGER

DO NOT connect the

OUTPUT

 

MODEL NO. DPC-5.2

power cord until all

VIDEO

COAXIAL OPTICAL

 

 

connections are

 

 

 

L

 

 

complete.

Y

R

S VIDEO

Making stereo audio connections

Using an audio cable (sold separately), make audio connections from the AUDIO OUTPUT L and R jacks to the corresponding jacks on the stereo component.

Be sure to set Digital Audio Out setting to “PCM” using the setup menu explained in “Customizing the Settings” starting on page 30. See page 35 for direct information.

Notes

Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Changer and the stereo component: red for R (right) audio and white for L (left) audio.

Do not make connections to the PHONO or TUNER jacks on the stereo component.

To audio input

An amplifier or receiver

with stereo inputs

Audio cable (not supplied)

Audio (R)

Analog signal

Audio (L)

Digital signal

Coaxial plug

Digital signal

Optical plug

Signal flow

16

Image 16
Contents DPC-5.2 Important Safeguards AvisFor Canadian model PrecautionsModèle pour les Canadien Power What is moisture condensation?Do not use the unit when moisture condensation may occur Regional Restriction Codes Region NumberTable of Contents About Video CDs Playable Discs Structure of the Disc ContentMP3 compatibility information Cleaning Discs Handling DiscsStoring Discs Do not touch the playback side of the discFeatures Features/Supplied AccessoriesSupplied Accessories Preparing the Remote Controller Using the Remote ControllerReplace the battery compartment cover Inserting the BatteriesControl Position and Names Front PanelControl Position and Names Rear PanelDisplay Display ExamplesRemote Controller Making Connections Using the supplied audio/video connection cableConnections to a TV Making Connections Optional Video ConnectionsMaking S-video connections Making component video connectionsDigital connections Optional Audio ConnectionsMaking stereo audio connections DVD Changer enters standby mode Standby indicator lights up Connecting the PowerTurning on Basic Playback Starting PlaybackTo stop playback To select a discBasic Playback Various PlaybackUsing the on-screen Banner Display Using Banner DisplayTo turn off the Banner Display Selecting a Title Using Banner DisplaySelecting a Chapter or Track Selecting a Playback Audio Setting Changing the Subtitle LanguageUsing IntroScan function Using Angle on the remote controllerChanging the Camera Angle To turn off the angle menuUsing a bookmark To cancel random play Other OperationsRandom play To turn off the Random Play displayRepeat play Other operationsCD Play function To cancel memory playback Memory PlayTo delete memory Insert chapter or trackMP3 Function Playing back MP3To skip files MP3 On-screen displaySelecting MP3 files MP3 memory playbackTo move to the upper layer To select the folders to be played directlyMaking Adjustments to Setting Customizing the SettingsHow to use Return Customizing the Settings Language Setting Audio LanguageLanguage-related settings Subtitle LanguageOperation Setting Rating/Parental lock PasswordGeneral utility settings To input passwordTo change password Operation SettingTo clear password Picture Setting Audio Setting TV Aspect Dynamic RangeAudio Setting Digital Audio Out Linear PCMTable of Languages Table of Languages and Their Code NoSymptoms Causes Remedies Pages TroubleshootingDVD Changer DVD Changer SpecificationsOutputs Memo Onkyo U.S.A. Corporation