Integra DPC-5.2 Changing the Camera Angle, Using IntroScan function, To turn off the angle menu

Using Banner Display

DVD

Changing the Camera Angle

Angle : 1 Angle : 2 Angle : 3

If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching.

1 Press ON SCREEN during playback.

2	Press 2/3 until the Angle icon is
	highlighted.

3	Press ENTER.
	The angle menu appears.
4	Press ENTER to select the angle.
	Each time you press ENTER, the angle
	changes.

To turn off the angle menu

Press ON SCREEN or CLEAR.

The menu is switched off when no operation is performed for about 5 seconds.

Using ANGLE on the remote controller

1Press ANGLE on the remote controller during playback.

2Press ANGLE or ENTER to select the camera angle.

Notes

•You can change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback.

•If you pause a picture immediately after changing the camera angle, the resumed playback picture may not use the new camera angle.

VCD CD

Using IntroScan function

Track : 1 Track : 2 Track : 3

IntroScan plays the first few seconds of each track on the Video CD or CD similar to the scan feature that's on many car radios.

1	When playing a Video CD, press ON
	SCREEN to display the Banner
	Display.
	When playing a CD, the Banner Display
	appears on the screen automatically.
2	Press 2/3 until the IntroScan icon
	is highlighted.

3	Press ENTER.
	The INTRO indicator lights.
	The first 10 seconds of each track will be
	played.
	Press £ to stop IntroScan playback and start

playing the current track entirely.

Note

After IntroScan goes through all of the tracks, it stops.

23