Samsung 29Z6, 34Z6, 34Z7, 32Z6, 32Z7, 29Z7 manual Extra Picture Settings, Scan mode, Digital NR, Tilt

Extra Picture Settings

◆Scan mode

You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. Natural, Digital and Progressive modes are available.

◆Digital NR

If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen.

◆Tilt

If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting.

◆LNA

This feature is very useful in the situation that the TV is used in a weak signal and amplifies the TV signal in the weak signal area, but not noise.

This feature is working only in a weak signal condition, and that is memorized on current channel, additional.

1Press the MENU button.

Result: The options available in the Picture group are displayed.

2Press the - or + button.

3Select the required option (Scan mode, Digital NR, Tilt or

LNA) by pressing the or button.

4Press the - or + button to change the setting.

◆Scan mode : Natural, Digital or Progressive

◆Digital NR : Off or On (activating)

◆Tilt : -7 to +7

◆LNA : Off or On (activating)

ENG

		Picture
	Mode		➛ Dynamic			❿
	Adjust			❿
	Scan mode			: Natural
	Digital NR			: Off
	Tilt			:	0
	LNA			: Off
Select			Adjust		Exit
		Picture
	Mode		➛ Dynamic			❿
	Adjust			❿
	Scan mode			: Natural
	Digital NR			: Off
	Tilt			:	0
	LNA			: Off
Select			Adjust		Exit
		Picture
	Mode		➛ Dynamic			❿
	Adjust			❿
	Scan mode			: Natural
	Digital NR			: Off
	Tilt			:	0
	LNA			: Off
Select			Adjust		Exit
		Picture
	Mode		➛ Dynamic			❿
	Adjust			❿
	Scan mode			: Natural
	Digital NR			: Off
	Tilt			:	0
	LNA			: Off
Select			Adjust		Exit

23