Samsung V6700 user manual Index Skip Search, Using the Tape Counter,  or  button

4 When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark

INTRO SCAN : 

5 If you want to watch the tape from a particular Index, press the ll button twice.

Index Skip Search

This feature will enable you to fast forward/rewind to a specific point on a tape: e.g. If you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.

1 Press the SEARCH button.

The VCR Function menu is displayed. Press the orbutton to select Intro Scan.

		VCR Function
SETUP	Go To [0:00:00]
DVD	End Search
VCR	Intro Scan
PROG
FUNC
	OK	RETURN	MENU

2 Press the OK or  button.

3 Press the  or  button twice more.

4 These Index searches can be made forwards (press the  button) or backwards (press the  button).

( -20 ● ● 0 ● ● +20 )

This will take you directly to the start of the desired programme is located.

INDEX SEARCH :  -06

To cancel an Index search simply press the ll or ■ button.

Using the Tape Counter

The tape counter:

•Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds).

•Is reset when a cassette is inserted in the DVD-VCR.

•Allows you to find the beginning of a sequence easily.

•If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1 Insert a cassette in your DVD-VCR.

To set the tape counter to zero at the begin- ning of a sequence:

0:00:00

•Press the INFO button twice to display the counter.

•Press the CLEAR button when you want to set the tape counter to zero.

2 When you are ready,

•Start Playback or Recording.

•Press the ■ button.

•To fast-froward or rewind to the sequence at which the counter was set to zero, press the

 or  button.

•Some DVD-VCR information, such as the counter, can be displayed on the television screen (Unless you have deactivated the Screen Messages mode; refer to page 22).

Press the INFO button:

•Once to display the current function, programme number, recording speed, time and counter.

•Twice to display the counter only.

•Three times to display the time remaining on the cassette.

•Four times to clear the display.

30 - English