EURO • Printed in England • GB • F016 L69 838 • CLUB/ROYALE • OSW 08/01
CLUB/ROYALE - Buch Seite 2 Dienstag, 7. August 2001 2:41 14
Product Specification
Cylinder Mower | Club 20 I/C | Royale 20E I/C | Royale 24E I/C | Royale 30E I/C | ||
| Professional |
|
|
|
|
|
Part number | F016 312 142 | F016 310 442 | F016 310 542 | F016 310 642 | ||
Engine type | B&S Intek Pro | B&S Intek Pro | B&S Intek Pro | B&S Intek Pro | ||
Engine speed (rpm) | 2 800 | 2 800 |
| 2 800 | 2 800 | |
Engine size (cm3) | 206 | 206 |
| 206 | 206 | |
Fuel Tank capacity (l) | 4.1 | 4.1 |
| 4.1 | 4.1 | |
Electric start | no | yes | yes | yes | ||
Rated power (kW) | 6.5 | 6.5 |
| 6.5 | 6.5 | |
Blade width (cm) | 51 | 51 |
|
| 61 | 76 |
Height of cut (mm) | 2.8 – 18 | 5 – 35 | 5 – 35 | 5 – 35 | ||
Cuts per metre | 146 | 73 |
|
| 73 | 73 |
Grassbox capacity (l) | 60 | 76 |
|
| 99 | 126 |
Weight (kg) | 92 | 103 |
| 111 | 135 | |
Max overall width (cms) | 77 | 70 |
|
| 79 | 94 |
Serial Number | See rating details on machine |
|
| |||
|
|
|
|
| ||
Intended Use |
|
|
| Operating Controls | ||
|
|
|
|
|
|
|
This product is intended for domestic and commer- cial lawn mowing.
Note: commercial use does not include rental/hire use.
Introduction
This manual gives instructions on the correct assem- bly and safe use of your machine. It is important that you read these instructions carefully.
When fully assembled the machine weighs approxi- mately 92 – 135 kg. If necessary, obtain assistance to remove from packaging.
Take care when transporting the mower to the lawn, as the blades are sharp.
Delivered Items
Carefully remove the machine from its packaging and check that you have all the following items:
–Lawnmower with handle assembly
–Operating instructions
–Spare parts list
–Tool kit
When parts are missing or damaged, please contact your dealer.
1Handle
2Drive lever
3Ignition key (electric start models only)
4Engine
5Petrol filler cap
6Oil filler cap
7Grassbox
8Height of cut knob
Not all of the accessories illustrated or described are included as standard delivery.
Assembly
AHandles
Assemble the handles as shown and fit the throttel le- ver.
BEngine Oil
The mower is not supplied with oil in the en- gine, however it is possible that there is a small quantity in the engine. It is essential to fill with oil before starting the engine it avoid damage to your engine. It is important to use the recom- mended oil to avoid damage to your engine.
The engine is fitted with a switch that will prevent the engine from starting without suffcient oil.
1.With the mower standing on level ground, un- screw and remove the oil filler dip stick 9.
2.Wipe the oil filler dip stick 9 clean; refit and tighten the oil filler dip stick 9, then remove it again. Check the oil level.
14 • F016 L69 838 • TMS • 11.07.01 | English - 2 |
