Using the LNA (Low Noise Amplifier) Feature (depending on the model)
This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a
1Press the MENU () button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER () button.
3Press the ▲ or ▼ button to select LNA, then press the ENTER () button.
4Select Off or On by pressing the ▲ or ▼ button, then press the ENTER ( ) button.
5Press the EXIT ( ) button to exit.
➢ ◆ | Setting the LNA option to “On” may produce worse picture quality |
| due to the current channel’s signal condition. Hence, apply LNA On/Off |
| selectively according to the picture quality that is currently displayed. |
◆ | Depending on areas, factory mode of LNA, will be set up as On or Off. |
T V |
| Channel | |
| More |
|
|
Fine Tune | Off | | |
LNA | : | | |
Move | Enter |
| Return |
T V |
| Channel | |
| More |
|
|
Fine Tune | On |
| |
LNA | : |
| |
|
| Off | |
Move | Enter |
| Return |
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1Press the MENU () button to display the menu.
2Press the ▲ or ▼ button to select Picture, then press the ENTER () button.
3Press the ENTER () button twice to select Mode.
4Press the ▲ or ▼ button to select the required option, then press the ENTER () button.
Available options: Dynamic - Standard - Movie - Custom
T V |
|
|
| Picture | |||
Mode |
|
| : | Dynamic | | ||
Size |
|
| : | Auto Wide | | ||
Digital NR | : | On | | ||||
Tilt |
|
| : | 0 | | ||
Film Mode | : | Off | | ||||
PIP |
|
| : | Off | | ||
Move |
| Enter |
|
| Return | ||
|
|
| |||||
| |||||||
|
|
|
|
|
|
|
|
5Press the EXIT ( ) button to exit.
➢You can also set these options simply by pressing the P.MODE ( ) button.
T V |
|
| Mode |
Mode |
|
| Standard |
Contrast |
|
| Dynamic |
|
| Movie | |
Brightness |
| Custom | |
Sharpness | : | 50 | |
Colour |
| : | 50 |
More |
|
|
|
Move | Enter | Return |
English - 15