Samsung BD-UP5000 user manual Connecting to a TV Component

Connecting to a TV (Component)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(Pb), red(Pr) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1.Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of the Duo HD player to the COMPONENT IN terminals of your TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV.

3.Press the input selector on your TV remote control until the Component signal from the Duo HD player appears on the TV screen.

~If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select COMPONENT as the external source of the TV.

Audio Cable

Component cable

(not included)

e ●ctionsconn

Green Blue Red White

M ` Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “Pr, Pb, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

`You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the disc type. (See page 42)

`The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are connected. The resolution may also be different depending on the disc. (See page 42)

`In DVD playback, if both HDMI and Component jacks are connected and you select the Component mode, the Display Setup menu will show the output resolution as 1080p. The resolution is actually 480i.

English _23