SiPTel C01 IP Phone User Manual
5. Using SiPTel IP Phone
5.1.Connecting IP phone to Internet
5.1.1.Using in Dial-up Mode
STEP 1 | Press @ISP button on the key pad of SiPTel IP Phone. The |
| connect to the |
| If you want to cancel to connect to an ISP, please press ‘@isp’ |
button again. | |
Connecting |
|
Wait a moment |
|
STEP 2 If you can see ‘ATDT +
ATDT specified the dialtype as TONE and
OKATDP specifies the dialtype as PULSE.
ATDT 172233
XXXXX
STEP 3 If you can see ‘PPP Start’ message on the LCD, it means that the connection to the dial- up ISP is succeeded.
If you can’t see the left display, please try again.
XXXXXXXX
Connect 34667
PPP Start
STEP 4 If you can see the following display, it means that the connection is successful, and SiPTel IP Phone has obtained a Dynamic IP address from the
If you can’t see the left display, please try again.
IP: XXX.XXX.XXX.XXX
Connection OK