SiPTel C01 IP Phone User Manual
4.4.2.1.1. Static IP User
If you are a static IP user, select this menu and setup the static related settings required for using the SiPTel IP Phone.
STEP 1 Select ‘1: LAN (Static)’ in menu selection.
|
| Press 1 or select ‘1: LAN (Static)’ using navigation keys and press |
<Network Mode> | OK key. | |
1:LAN(Static) |
|
|
2:DHCP |
|
|
STEP 2 Enter the IP address for the SiPTel IP Phone. You can use * to get a dot between octets.
?
<Static>
1:IP
61.54.235.53
Enter the IP Address given by the ISP and press OK key. Ex: To enter 61.54.235.53 you would key in
61*54*235*53
STEP 3 Enter the Subnet Mask
<Static>
2:Subnet Mask 255.255.255.0
Enter the Subnet Mask given by the ISP and press OK key. Ex: To enter 255.255.255.0, you would key in
255*255*255*0
STEP 4
<Static>
3:Gateway 61.54.235.254
Enter the Gateway IP address
Enter the Gateway IP Address given by the ISP and press OK key. Ex: To enter 61.54.235.254, you would key in
61*54*235*254