❷
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Converts to
Digital Audio Output.
❸DTS
Select On when connecting to a DTS Decoder.
-Off : Doesn’t output digital signal.
-On : Outputs DTS Bitstream via digital output.
Note
•There is no analog audio output when you play a DTS sound disc.
❹Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❺PCM Down Sampling
-On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
-Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Note :
Even when PCM Down sampling is Off
•Some discs will only output down sampled audio through the digital outputs.
•To make the Setup menu disappear, press the MENU button.
HDMI
- If your TV is not compatible with compressed multi- channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.
-If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down sam- pling to On.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1. | With the unit in Stop mode, press the MENU button. | ||
2. | Press the | / buttons to select Setup, then press the | |
| or ENTER button. | ||
3. | Press the | / buttons to select Display Setup, then press | |
| the | or ENTER button. | |
4. | Press the | / buttons to select the desired item, then | |
| press the | or ENTER button. | |
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
Setup
Enter 
Return 
Menu
❶TV Aspect
Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).
-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
-4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.
|
| DISPLAY SETUP | |
| AspectTV AspectRatio | : 16:9 Wide | |
| Still Mode | √ 4:3 Letter Box | |
| Screen Message | 4:3 Pan&Scan | |
| 16:9 Wide | ||
| TV System |
|
|
| Video Output |
| : SCART RGB |
| HDMI |
|
|
Setup | Picture Quality |
| |
|
|
| |
| Enter | Return | Menu |
|
|
|
|
❷Still Mode
These options will help prevent picture shake in still mode and display small text clearer.
-Auto : When selecting Auto, Field/Frame mode will be automatically converted.
-Field : Select this feature when the screen shakes in the Auto mode.
-Frame : Select this feature when you want to see small letters more clearly in the Auto mode.
❸Screen Messages
Use to turn
❹TV System
-NTSC : In case of using NTSC disc
•If your TV system only has
•If your TV system only has NTSC, input you must choose “NTSC ”.
•If you set up the NTSC TV, HDMI output frame rate is 60 Hz. - PAL : In case of using PAL disc
•If your TV system only has
•If your TV system only has PAL input, you must choose “PAL ”.
•If you set up the PAL TV, HDMI output frame rate is 50 Hz .
28