Samsung DVD-H1080W, DVD-H1080R, DVDH1080 user manual Connection to a TV Interlace

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using component video cables (not included), connect the

COMPONENT VIDEO OUT terminal on the rear of the

DVD player to the COMPONENT IN terminal of TV.

2
Using the audio cables, connect the AUDIO (red and			RED
white) OUT terminals on the rear of the DVD player to the				BLUE GREEN
AUDIO (red and white) IN terminals of TV. Turn on the
DVD player and TV.
3		RED	WHITE
Press the input selector on your TV remote control until		Audio Cable
the Component signal from the DVD player appears on the				Component cable
TV screen.	RED WHITE	RED	BLUE	GREEN

4

Set the Video Output to I-SCANin the Display Setup menu. (See pages 29-30)

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)

-The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals can vary depending on the TV set. Please refer to the user's manual of the TV.

ctions● Conne

English _