Intel Installing Z-U130 USB Solid-State Drives on Your Desktop Board

Installing and Replacing Desktop Board Components

Installing an Intel® Z-U130 USB Solid-State Drive (or Compatible Device)

An Intel Z-U130 USB Solid-State Drive (or compatible device) can be installed on the Desktop Board by using the onboard USB 2.0 header indicated in Figure 1, DD. This header provides support for the solid state drive.

To install an Intel Z-U130 USB Solid-State Drive (or compatible device) on the Desktop Board, follow these steps:

1.Observe the precautions in "Before You Begin" on page 23.

2.Align the connector (Figure 11, A) on the bottom of the solid state drive with the USB 2.0 header on the Desktop Board. The connectors are keyed and will mate correctly when the solid state drive is oriented as shown in Figure 11.

Figure 11. Installing an Intel Z-U130 USB Solid-State Drive

(or Compatible Device)

33