Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper

NOTE

Always turn off the power and unplug the power cord from the computer before changing a jumper. Moving the jumper with the power on may result in unreliable computer operation.

Figure 15 shows the location of the Desktop Board’s BIOS configuration jumper block.

Figure 15. BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables board operating modes. Table 15 shows the jumper settings for each of the available modes.

41

Page 41
Image 41
Intel D510MO manual Setting the Bios Configuration Jumper, Bios Configuration Jumper Block