C O N N E C T I O N S
Connection to a TV (S-Video)
-Connecting to your TV using an
-You will enjoy high quality images.
1
Using an
OUT terminal on the rear of the DVD player to the
2
Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the S-
Video signal from the DVD player appears on your TV screen.
4
Set the Video Output to
Setup menu. (See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 12)
Note
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
-The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.