O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC, IRC). See steps 1~3 on previous page.
Channel
Auto Program | √ | |
Add/Delete | : Deleted | √ |
Air/CATV | : Air |
|
Name | : |
|
Move | Adjust | Return |
2
Press the ▲ or ▼ button to select “Auto Program” and then press the ENTER button.
The “Auto Program” is automatically displayed.
Channel
Auto Program | √ | |
Add/Delete | : Deleted | √ |
Air/CATV | : Air |
|
Name | : |
|
Move | Enter | Return |
3
Press the ENTER button to start "Auto Program". The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Channel menu reappears. Press the MENU button to skip and press the ENTER button to stop.
Press the EXIT button to exit.
Auto Program
Air 3
Start
Enter 
Return
Auto Program
Air 5
Stop
Enter 
Return
▼ The TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.