Samsung CL29M16MQD manual Connection Jacks Rear, Video Input, Component Audio Input

Y O U R N E W T V

Connection Jacks (Rear)

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.

Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 10 – 17.

ŒVIDEO Input

Video signals from VCRs, DVD players and similar devices.

´AUDIO Input (INPUT1 and 2) /

COMPONENT AUDIO Input

(INPUT 2)

Audio signals from VCRs, DVD players and similar devices.

Use these jacks to connect the audio signals from a DVD player when using the DVD video input jacks. When not using the DVD jacks, these audio jacks function as audio for Video 2 or S-VIDEO.

ˇAUDIO-VIDEO MONITOR Output

¨S-VIDEO Input

S-Video signal from an S-VHS VCR or DVD player. Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV2).

ˆCOMPONENT VIDEO Input

Connect video from a DVD player.

Note: Only black and white signals are output from a monitor in DVD mode.

ØVHF/UHF

Connect to an antenna or to a cable TV system.

These audio-video signals are identical to A/V signals being displayed on the big screen. (Typically used as the input signals for a recording VCR.)

English - 8