|
|
SETUP
Front Panel Controls |
1STANDBY / ON
•When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.
2MIC 1
•Connect microphone 1 for Karaoke functions.
3MIC 2
•Connect microphone 2 for Karaoke functions.
4VOLUME
•Use to adjust microphone volume level.
5DIGITAL ECHO
•Use to adjust echo delay.
Front Panel Display
6DISC TRAY
•Load the disc here.
7DISPLAY
•Operation indicators are displayed here.
8OPEN/CLOSE
•Press to open and close the disc tray.
9PLAY/PAUSE
•Begin or pause disc play.
10STOP
•Stops disc play.
11SKIP
•Use to skip a scene or music.
1 2 3 4 5 6
Rear 
Panel
1 | DIGITAL AUDIO OUT JACKS |
| • Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. |
| Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder. |
2 | MIXED AUDIO OUT JACKS |
| • Connect to the Audio input jacks of your television, audio/video receiver, or VCR. |
3 | VIDEO OUT JACK |
| • Use a video cable to connect to the Video input jack on your television. |
4 | |
| • Use the |
| picture. The |
5 | COMPONENT VIDEO OUT JACKS |
| • Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. |
| Along with |
| the VIDEO OUT SELECT. |
1Angle indicator. You can select multiple angles of a scene recorded by different cameras.
2Disc type indicators
3Reverse play / Pause / Forward play
4Lights when 3D surround is turned on.
5DVD : Title number
6DVD : Chapter number.
7Video/Audio CD : Track number
8Repeat play mode
8
9Linear PCM audio output
10 PAL indicator
11 Dolby Digital Disc
12 DTS (Digital Theater System) output
13
14 Displays various messages concerning operations such as PLAY, STOP, LOAD, RANDOM, no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
6 VIDEO OUT SELECT SWITCH |
• Use the switch to set video out. If Scart jack is selected, |
Scart jack may not work. |
9