Samsung DVD-P240 manual Setting Up the Parental Control Troubleshooting, About the Change Password

Setting Up the Parental Control

Troubleshooting

1

With the player in Stop mode, press the MENU button.

Before requesting service (troubleshooting), please check the following.

2

3

4

5

6

Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

The player is locked ( ).

Select Parental Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

Enter your password.

The Parental Setup screen appears.

Select Rating Level using UP/DOWN buttons, and press ENTER or RIGHT button.

Select Rating Level you want using UP/DOWN buttons. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.

-To cancel the Rating Level, select No using RIGHT or ENTER in Use Password.

About the Change Password;

-Highlight Change Password using UP/DOWN buttons.

-Press ENTER button.

The CHANGE PASSWORD screen appears.

-Enter your new password. Enter the new password again.

PASSWORD CHECK

Enter Password

- - - -

0 ~ 9 RETURN

e.g) Setting up in LEVEL6.

RATING LEVEL

Level 8 Adult

Level 7

Level 6

Level 5

Level 4

Level 3

Level 2

Level 1 Kids Safe

Problem

No operations can be performed with remote.

Disc does not play.

5.1channel sound is not being reproduced.

The	icon appears on
screen.

Disc Menu doesn’t appear.

Play mode differs from the Setup Menu selection.

The screen ratio cannot be changed.

No audio.

The screen is blocked

Forgot password

Action

•	Check the batteries in the remote. They may need replacing.
•	Operate the remote control at a distance of no more than 20 feet.
•	Remove batteries and hold down one or more buttons for several
	minutes to drain the microprocessor inside the remote to reset it.
	Reinstall batteries and try to operate the remote again.
•	Ensure that the disc is installed with the label side facing up.
•	Check the region number of the DVD.
•	5.1 channel sound is reproduced only when the following
	conditions are met. :
	1) The DVD player is connected with the proper amplifier
	2) The disc is recorded with 5.1 channel sound.
•	Check whether the disc being played has the “Dolby 5.1 ch” mark
	on the outside.
•	Check if your audio system is connected and working properly.
•	In a SETUP Menu, is the Audio Output set to Bitstream?
•	The features or action cannot be completed at this time because:
	1. The DVD’s software restricts it.
	2. The DVD’s software doesn’t support the feature (e.g., angles).
	3. The feature is not available at the moment.
	4. You’ve requested a title or chapter number or search time that
	is out of range.
•	Check if the disc has a Menu.
•	Some of the functions selected in the Setup Menu may not work
	properly if the disc is not encoded with the corresponding function.
•	The Screen Ratio is fixed on your DVDs.
•	Make sure you have selected the correct Digital Output in the
	Audio Options Menu.
•	Press power on from a cold start with no disc in the unit. Press the
	STOP (	) and PLAY (	) buttons simultaneously on the front
	panel for three seconds. The SELECT MENU LANGUAGE display
	will appear. Select the number button of the desired language.
•	Press power on from a cold start with no disc in the unit. Press the
	STOP (	) and PLAY (	) buttons simultaneously on the front
	panel for three seconds. The SELECT MENU LANGUAGE display
	will appear. Select the number button of the desired language.
	Press the MENU button, and then press DOWN button to select
	the Parental Setup. The Parental Setup is now unlocked as

Page

P5

P9

P14

P42

P17

P39~45

P44

P42

P44

P45

NOTE

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

•If you have forgotten your password, see Forgot Password in the Troubleshooting Guide.

If you experience other problems.

	indicated on the display. You can change your password.
	See page 45.
•	Go to the contents and find the section of the instruction book that
	contains the explanations regarding the current problem, and follow
	the procedure once again.
•	If the problem still cannot be solved, please contact your nearest
	authorized service center.

REFERENCE

46 47