Playing a Disc, Connection to a TV For Video

Choosing a Connection

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

	Method 1	Method 2	Method 3	Method 4
	Good	Better	Best	Optimum
Basic Audio	picture	picture	picture	picture

AV	S-Video	Video
Cable	Cable	Cables
	OR	OR

Playing a Disc

Before Play

•Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.

•If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up :

If you want to select the language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.)

If you don’t select language, at first time, setting value of Setup menu will be lost.

7.Step Motion Play (Except CD)

Press the STEP button on the remote during play.

-Each time the button is pressed, a new frame will appear.

-No sound is heard during STEP mode.

-Press the PLAY/PAUSE ( ) to resume normal play. (You can only perform step motion play in the forward direction.)

8.Slow Motion Play (Except CD)

Press and hold the button on the remote during PAUSE or STEP mode. Press again and you can select slow motion play for 1/8, 1/4 and 1/2 of normal speed.

-No sound is heard during slow mode.

-Press the PLAY/PAUSE ( ) to resume normal play.

-Reverse slow motion play will not work.

DVD

Player

	Pr	Pb	Y	Pr	Pb	Y
R	L

ANALOG AUDIO OUTVIDEO OUTS-VIDEO OUTCOMPONENT VIDEO OUTCOMPONENT VIDEO OUT

Audio Output	Video Output	S-Video	Component Video	Component Video
Jacks	Jack	Jack	Jacks	Jacks
			(Interlace)	(Progressive)

Method 1

DVD Player + TV with Video Input Jack

(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)

Method 2

DVD Player + TV with S-Video Input Jack

(The Video Output in Setup Menu must be set to the S-Video.)

Method 3

DVD Player + TV with interlace Scan Component Video Jacks

(The Video Output in Setup Menu must be set to the Component(I-SCAN).)

Method 4

DVD Player + TV with Progressive Scan Component Video Jacks.

(The Video Output in Setup Menu must be set to the Component(P-SCAN).)

•If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds, change the TV’s external input to 525p(480p or Component) and select “Yes” (See Page 29).

•If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.

Important Note

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

•Depending on your TV, the Method of connection may differ from the illustration above.

Play

1.Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray opens.

2.Place a disc gently into the tray with the disc’s label facing up.

3.Press the PLAY/PAUSE ( ) button or OPEN/CLOSE button to close the disc tray.

4.Stopping Play

Press the STOP ( ) button during play.

5.Removing Disc

Press the OPEN/CLOSE button.

6.Pausing Play

Press the PLAY/PAUSE ( ) or STEP button on the remote during play.

-Screen stops, no sound.

-To resume, press the PLAY/PAUSE ( ) button once again.

RESUME function

When you stop disc play, the player remembers where you stopped, so when you press the

PLAY ( ) again, it will pick up where you left off. (unless the disc is removed or the player is

unplugged, or if you press the STOP ( ) button twice.)

NoteNote

•If the player is left for about 5 minutes in pause mode, it will stop.

•If the player is left in the stop mode for more than about 30 minutes, the power will automatically shut off. (Automatic Power-Off Function)

•If the player is left in the stop mode for more than one minute without any user interaction, a screen

saver will be activated. Press the PLAY ( ) button to resume normal play.

•This icon indicates an invalid button press.

ENG-10

ENG-11