Selecting the Desired Screen Angle

DVD

When a DVD contains multiple angles of a particular scene, you can select the Angle function.

Check to see if an ‘ANGLE ( )’ mark is present at the upper right hand corner of the screen.

1.When an ‘ANGLE’ mark is shown, press the ANGLE button.

1/4

MARK: ON

2.Use the UP/DOWN button to select the desired screen angle. Then press the ENTER button.

2,3

3/4

MARK: ON

DDVVDD//VVCCDD

Using the Bookmark Function

The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly find the section at a later time.

1.During playback, press the BOOKMARK button on the remote.

- - -

MARK ENTER

	1,A,a
	C	Use the LEFT/RIGHT button to move to the desired bookmark
	C	2.prompt.
	c	2.
	c	When you reach the scene you want to mark, press the ENTER
		When you reach the scene you want to mark, press the ENTER
		3.button. The prompt will change to a number (1, 2, or 3).
		3.
	2,3,	4.Press the BOOKMARK button to turn off the display.
	b	4.

(Angle information display example)

3.Use the LEFT/RIGHT button to determine whether or not the ‘ANGLE’ mark will be dis- played.

3/4

MARK: OFF

A.During playback, press the A.BOOKMARK button on the

remote.

B.Use the LEFT/RIGHT but- B.ton to select a marked

scene.

C.Press the PLAY/PAUSE C.button to skip to the

marked scene.

a. During playback, press the a. BOOKMARK button on the

b. Use the LEFT/RIGHT but- b. ton to select the bookmark number you want to delete.

c. Press the CLEAR button to c. delete a bookmark number.

Press the BOOKMARK button to turn off display.

ADVANCED

NOTE

• This function is disc-dependent, and may not work with all DVDs.

• This function does not work when a DVD has not been recorded with a multi-camera angle system.

• Up to three scenes may be marked at the same time.

NOTE • When in VCD 2.0 mode (MENU ON mode), this function does not work.

• Depending on the disc, the Bookmark function may not work.