Stereo Connections Monitor TV Connections

00044A DVD-V7070/AFR-Eng4 3/21/03 2:34 PM Page 52

Stereo Connections

Monitor TV Connections

DVD & VCR

You can enjoy stereo sound when watching movies and TV shows by connecting your DVD-VCR to your home stereo system or stereo TV.

1Connect DVD-VCR to Stereo

Connect RCA cables from the Line Out Left & Right Audio jacks on the back panel of the DVD-VCR to the Auxiliary Inputs on your stereo receiver. If you are using a stereo television, connect the Video Output as well.

2Set Stereo to Auxiliary Mode

Set your stereo receiver or television to “Aux” or “Tape,” whichever selects the line input for your particular device.

3Play a Tape

Insert a DVD or Hi-Fi stereo videotape in your system and adjust the volume on your stereo receiver or television. You should hear the audio through your stereo speakers.

•If you still do not hear stereo sound after inserting Hi-Fi stereo video tape, press the Audio button until “Hi-Fi” appears on the on-screen display.

Monitor-style televisions offer improved sound and picture over regular televisions because they receive the audio and video signals directly from the DVD-VCR through the line inputs.

NOTE: A monitor television is not the same as a computer monitor.

1Connect VCR to Monitor TV

Connect RCA cables from the Audio/Video Line Out jacks on the back panel of the DVD-VCR to the Audio/Video Line Inputs of your monitor TV.

2Set TV to Auxiliary Mode

Set your monitor TV to “Aux,” “Video,” or “Line.” Refer to your monitor television owner’s manual for the correct setting.

3Connection is Complete

NOTE: With this connection, the TV/VCR button has no effect. It is as if the TV/VCR button were always set to VCR.

DVD & VCR

To Monitor TV Audio/Video Inputs

SCREEN FIT
MODE/	4
REPEAT
	7
ZOOM

3D SOUND TV MUTE

100+

2	3
	TV/VCR
SHUTTLE
5	6	3
	AUDIO	3
8	9
	ANGLE
	CLEAR
0	INPUT SEL.
0