Samsung DVD-VR320 instruction manual RF Output Channel, Press the …† buttons to select Channel

	4		Press the …† buttons to select Auto Channel
			Memory, then press the ENTER or √ button.
				No Disc		Auto Channel Memory
				Setup	Total channel numbers:		06/125
				Timer Rec.	Saved channel :	05
							5%
					Scanning...
					Stop
					SELECT	RETURN	EXIT
			• The DVD Recorder & VCR will automatically
			search for all available channels in the selected
			tuner band. This procedure may take a few min-
			utes to complete.
			• When finished, the lowest channel found will be
			displayed.
System Setup			• Press ENTER button to stop or cancel scan-
			ning.
		Channel Add/Delete

Use this feature if Auto Channel Memory missed a channel that you would like to add and delete a channel you wish to remove.

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
	Press the …† buttons to select Channel Set, then
3 press the ENTER or √ button.
		No Disc				Channel Set
		Setup	Antenna/Cable TV		:	Cable TV	√
			Auto Channel Memory
		Timer Rec.					√
			Channel Add/Delete				√
			RF output Channel		:	CH3	√
		MOVE	SELECT	RETURN		EXIT

4	Press the …† buttons to select Channel
	Add/Delete, then press the ENTER or √ button.
		No Disc		Channel Add/Delete
		Setup
		Timer Rec.
			Select channel :		1
			Add	Delete
		NUMBER SELECT		RETURN		EXIT

5 Press the …† or number buttons to select the channels you want to add or delete on the Select channel screen. Then, press the ENTER button.

•Using …† buttons for channel selection allows the user to add/delete one channel at a time.

•Using CH/TRK (/ ) buttons for channel selection jumps to the next channel memorized in Auto Channel Memory.

Press the œ √ buttons to select Add or Delete,
6 then press the ENTER button.
	No Disc		Channel Add/Delete
	Setup
	Timer Rec.
		Select channel :		11
		Channel is added.
		Add	Delete
	NUMBER SELECT		RETURN		EXIT

RF Output Channel

When you connect the DVD Recorder & VCR to TV with RF Antenna Cable, follow the steps below to set the RF Output Channel.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the ENTER or √ button.

26 - English