Samsung DVD-VR320 instruction manual Using the Markers, Playing back a Marker, Clearing a Marker

Using the Markers

(VR mode)

1	Press the MARKER button during playback.
	Marker	N:0

			SELECT	RETURN
	Press the ENTER button when the desired scene
	2 appears.
	Marker	01		N:1
laybackP	MOVE	PLAY	CANCEL	RETURN

•The number 01 is displayed and the scene is memorized.

Press the œ √ button to move to the next posi-
3 tion.
Press the ENTER button again when the desired
4 scene appears.
Marker 01 02	N:2

MOVE PLAY CANCEL RETURN

•The number 02 is displayed and the scene is memorized.

•DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be dis- played as many different pages, numbering is necessary. If a disc in use is encoded with Disc Protect, Markers cannot be set or deleted. Only playback is available.

Playing back a Marker

1	Press the MARKER button during playback.
2	Press the œ √ buttons to select a marked scene.
		Marker	01 02	N:2

MOVE PLAY CANCEL RETURN

3 Press the ENTER or √l l button to start playing from the selected scene.

•If you press the NEXT SKIP (√√l )button or the PREVIOUS SKIP(lœœ)button in marker mode, and the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point.

Clearing a Marker

1	Press the MARKER button during playback.
2	Press the œ √ buttons to select a marked scene.
	Press the CLEAR button to delete the selected
	mark.
		Marker	01	02	03	04	05	06	07	08	09	10	N:10

Marker 01 02 03 04 05 06 07 08 09 N:9

MOVE PLAY CANCEL RETURN

•When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatical- ly move ahead by one and the 8th marker becomes the 7th.

44 - English