Samsung DVD-V940K Recording a Programme Immediately, Protecting a Recorded Cassette

Page 19

Recording a Programme

Immediately

Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 11 and 12.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG

( or ) buttons or

◆The LINE1 source using the INPUT SEL. button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 17).

6Hold REC (●) down for a while to start recording. Result: The record indicator appears on the

television and DVD-VCR display. An index is recorded on the tape (see page 22).

7To stop recording, press ■ once.

➢◆ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.

Your DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG

( or ) buttons or

◆The LINE1 source using the INPUT SEL. button for a satellite tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required. (see page 17)

6Hold the REC button (●) down for a while to start recording.

Result: The record indicator appears on the television screen and DVD-VCR display. An index is recorded on the tape.

(see page 22)

7Press the REC button (●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording automatically and power off.

8If you wish to cancel the recording before the end, press STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops and power off.

LENGTH 2:30

SET LENGTH :

PRESS REC ●

ENG-18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DVD-V940K Remote Control Overview Contents Following illustrations represent precautions Safety InstructionsCharacteristics Disc Type and CharacteristicsRear View of the DVD-VCR AccessoriesInserting Batteries in the Remote Control Display IndicatorsDVD Deck is active DVD, CD, VCD, or Svcd is loaded DVD-VCR Connecting DVD-VCR to the TV using the AV Cable❷ buttons Plug & Auto Set upDeck Control Keys Basic TV Tuner Operations Copy the DVD to VHS Tape Copying from DVD to VCR Setting the Date and TimeInsert Disc Insert VHS TapeSee Presetting the Stations AutomaticallyInstall option Press the correspondingIf you Then Presetting the Stations ManuallyInstall option 11 To...ThenSame time on the television screen Clearing a Preset StationChanging the Preset Station Table Press the Clear buttonCH21 .. CH36 .. CH69 Selecting the RF OUT Sound Mode G-KPlease refer to Selecting the Colour ModeOK or ❿, until On completion, press the Return button Auto Power offIntelligent Picture Control Screen MessagesDVD-VCR allows you to playback high quality S- VHS tapes Selecting the Cassette TypeRepeat Play VHS PlayProtecting a Recorded Cassette Recording a Programme ImmediatelyRecording a Programme with Automatic Stop Press ❿ to select the recording speed Using the Timer Programming FeatureChecking a Preset Recording You can check your preset recordingsPlaying a Cassette Cancelling a Preset RecordingAdjusting Picture Alignment Manually Selecting the Audio Output ModeYou can play a cassette in slow motion Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame Playing a Sequence at Variable SpeedsIntro Scan Searching for a Specific SequenceGo To 00000 Stop End SearchUsing the Assemble Edit Function Using the Tape CounterTape counter Karaoke Search Function Using the Karaoke FunctionRecording from Another VCR or Camcorder Score FunctionListed Choosing a Connection Setting Up the Language FeaturesOK or ❿ button Use the ,❷ buttons to select ‘English’Recorded Setting Up the Language FeaturesOK or ❿button Press the ,❷ buttons to select EnglishDynamic Compression Setting Up the Audio OptionsDolby Digital Out MPEG-2 Digital OutBlack Level Setting Up the Display OptionsAdjusts the brightness of the screen.On/Off TV AspectAbout the Rating Level Setting Up the Parental ControlAbout the Change Password There are up to 8 rating levels on a discBefore You Begin Special Playback Features Receiver ConnectionsComponent Connections for DVD What is Progressive Scan?If you are using a 43 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TVWhen Playing a DVD/VCD/CD Using the Display FunctionTo make the screen disappear, press the INFO. button again Selecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera AngleUsing the Audio button When playing a DVDRepeat Play Selecting the Audio Language Clearing a Mark Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Recalling a Marked SceneCD-R MP3/WMA discs Program/Random playbackRandom Play CD/MP3/WMA Program Play & Random PlayPicture CD Playback Program Play CD/MP3/WMAReturn to the Album Screen Press the OK buttonPress the button once to stop playback DivX/XviD/MPEG4 Special Playback FeaturesZoom MPEGs containing DivX can be divided into Video and Audio DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback MPEG4 SupportedKey Control Beginning Karaoke Functions Reserving a SongTypes of Karaoke disc Cancellation of reservationVocal Fader Guide MelodyOutput Technical SpecificationsGeneral InputProblem Explanation/Solution Problems and Solutions VCRBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action A2/NICAM Schematic DiagramsBlock Identification of Main PCB M.P.S Power Drive Display/Function System Control/Servo ENG-53 Hi-Fi A2/NICAM TM China/Hong Kong Only ENG-57 Input-Output Karaoke DVD AV Decoder DVD Servo DVD Audio/Video Memo This Appliance is Distributed by Electronics
Top Page Image Contents