Plug & Auto Set up |
| Tuning Your Television for the |
|
|
|
|
| |
|
|
|
Your
1Connect the coaxial cable as indicated on page 6. (Connecting Your
2Plug the
Result: The Auto Setup is started automatically.
3 Select the required language by pressing the | or |
❷ buttons. |
|
4Press OK to store the language selected. Result: A message appears.
5Press OK to start the auto scanning.
◆The number of stations automatically stored by the VCR depends on the number of stations that it has found.
6The current time and date are displayed automatically. Check the date and time. if it is :
◆Correct, Press RETURN button twice to exit the menu.
◆incorrect, see page 10.
➢Auto preset can be performed by pressing ■ on the front panel continuously for 5 seconds or more with no tape inserted in VCR mode.
You must tune your television for the
➢To view pictures from your
1Switch on the television.
2Switch on the
3Select a programme position on the television to be reserved for use with your
4Insert the video cassette in the
5Start a scan on your television or set the television to UHF channel 36.
6Fine tune the television until the pictures and sound are obtained clearly.
7If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the
8When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.
Result: That programme is now reserved for use with your