getting started
Rear Panel
4
1 2 3
1.AUDIO OUT JACKS
Use audio cables to connect to the Audio input jacks of your television or audio/video receiver
2.VIDEO OUT JACK
-Use a video cable to connect to the Video input jack on your television.
3.COMPONENT VIDEO OUT JACKS
-Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y video.
-If
-If
Note
4.DIGITAL AUDIO OUT JACKS
-Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.
-Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.
-Consult your TV User’s Manual to find out if your TV supports Progressive Scan
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
-See pages 47 ~ 48 to get more information on how to use the setup menu.
10_ getting started