Time Zone, Software Upgrade, Contact Samsung

General

Time Zone

You can specify the time zone that is applicable to your area.

Support

Software Upgrade

The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services.

By Online

To upgrade By Online, follow these steps:

1.Select By Online, and then press the ENTER button. The Connecting to Server message appears.

2.A popup message will appear if an update is available.

3.If you select Yes, the player will turn off automatically before restarting.

(Never turn the player on during an upgrade.)

4.The update progress popup will appear. When the update is completed, the player will turn back off automatically.

5.Press the POWER button to turn on the player.

✎NOTE

▪▪ The Update is complete when the player turns off after restarting. Press the POWER button to turn on the updated player for your use.

▪▪ Never turn the player off or back on manually during the update process.

▪▪ Samsung Electronics shall take no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

▪▪ If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button.

By USB

To upgrade by USB, follow these steps:

1.Visit www.samsung.com/bluraysupport.

2.Download the latest USB software upgrade zip archive to your computer.

3.Unzip the zip archive to your computer. You should have a single RUF file with the same name as the zip file.

4.Copy the RUF file to a USB flash drive.

5.Make sure there is no disc in the player, and then insert the USB flash drive into the USB port of the player.

6.In the player’s menu, go to Settings > Support > Software Upgrade.

7.Select By USB.

✎NOTE

▪▪ No disc should be inserted in the product when you upgrade the software using the USB Host jack.

▪▪ When the software upgrade is done, check the software details in the software Upgrade menu.

▪▪ Do not turn off the player during the software upgrade. It may cause the player to malfunction.

▪▪ Software upgrades using the USB Host jack must be performed with a USB flash memory stick only.

Auto Upgrade Notification

If you have connected the player to your network, and then set Auto Upgrade Notification on, the player automatically notifies you when a new software version is available for the player.

To set Auto Upgrade Notification on, follow these steps:

1.Select Auto Upgrade Notification, and then press the ENTER button.

2.Use the ▲▼ buttons to select On, and then press the ENTER button.

If there is a new software version available, the player notifies you with a popup message.

1.To upgrade the firmware, select Yes on the Pop-up. The player turns off automatically, then restarts, and begins the download.

(Never turn on the player manually here.)

2.The update progress popup appears.

3.When the update is complete, the player turns off again automatically.

4.Press the POWER button to turn on the player.

✎NOTE

▪▪ Update is complete when the player turns off after restarting. Press the POWER button to turn on the updated player for your use.

Never turn the player off or on manually during the update process.

▪▪ Samsung Electronics shall take no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

Contact Samsung

Provides contact information for assistance with your player.

Terms of Service Agreement

View the general disclaimer regarding third party contents and services.

Reset

All settings will revert to the default except for the network settings.