Network
Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic
Network setup directions start below.
✎NOTE
▪▪ This unit can only be connected to a Network via a wired connection.
Automatic Network Setup
1.In the Home menu, press the ◄► buttons to select Settings, and then press the ENTER button.
2.Press the ▲▼ buttons to select Network, and then press the ENTER button.
3.Press the ▲▼ buttons to select Wired Network Settings, and then press the ENTER button. The Wired Network Setting screen appears
Settings
Display |
| Wired Network Settings |
|
| |||
Audio | Internet Protocol Setup | : Auto |
|
| \ | ||
Network | IP Address | : | 0 | 0 | 0 | 0 | |
System |
| Subnet Mask | : | 0 | 0 | 0 | 0 |
Language Gateway | : | 0 | 0 | 0 | 0 | ||
SecurityDNS | : Auto | 0 | 0 | 0 | |||
General | DNS Server | : | 0 | ||||
Support | >Move |
| "Select | 'Return | |||
|
|
|
4.In the Internet Protocol Setup field, select Auto if it is not selected. (Press ENTER select AUTO, and then press ENTER.)
5.The Auto Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.
✎NOTE
▪▪ This process can take up to five minutes.
6.After the Network Function has acquired the network values, press the RETURN button.
7.Select Network Test, and then press ENTER to ensure the player has connected to your network.
8.When the Network Test is complete, press the RETURN twice to return to the Main Menu.
9.If the Network Function does not acquire the network values, go to the directions for Manual Setup.
Manual Network Setup
Before you start manual network setup, you need the network setting values.
To get the Network setting values through most Windows computers, follow these steps:
Windows XP
1.Right click the Network icon on the bottom right of the Windows desktop.
2.In the
3.On the dialog that appears, click the Support tab.
4.On the Support tab, click the Details button. The Network settings are displayed.
Windows 7
1.Click the Network icon on the bottom right of the Windows desktop.
2.In the
3.On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.
4.On the Support tab, click the Details button. The Network settings are displayed.
To enter the Network Settings into your player, follow these steps:
1.In the Home menu, press the ◄► buttons to select Settings, and then press the ENTER button.
2.Press the ▲▼ buttons to select Network, and then press the ENTER button.
3.Press the ▲▼ buttons to select Wired Network Settings, and then press the ENTER button. The Wired Network Settings screen appears.
4.Select the Internet Protocol Setup field, and then press the ENTER button.
5.Press the ▲▼ buttons to select Manual, and then press the ENTER button.
6.Press the ▼ button to go to the first entry field (IP Address).
7.Use the number buttons on your remote to enter numbers.
8.When done with each field, use the ► button to move to the next field. You can also use the other arrow buttons to move up, down, and back.
9.Enter the IP Address, Subnet Mask, and Gateway values in the same way.
10.Press the ▼ button to go to DNS.
11.Press the ▼ button to go to the first DNS entry field.
12.Enter the numbers as above.
13.Press the RETURN button on your remote.
14.Run a Network Test to ensure the player has connected to your network.
Network Test
Use this menu item to connect to the wired network or check whether your network connection is working or not.
Network Status
Use to check whether a connection to the network and the Internet have been established.
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection when you use the
•Allow (All) : The Internet connection is allowed for all
•Allow (Valid Only) : The Internet connection is allowed only for
•Prohibit : No Internet connection is allowed for any
✎NOTE
▪▪ What is a valid certificate?
When the player uses
▪▪ The Internet connection may be restricted while you are using
16