Samsung CL21T21 manual Connecting a VCR, Also, you can connect to AV in 2 on the side panel of TV

Page 15

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11~14).

1

Connect a coaxial cable between the “VHF/UHF” terminal on the TV and the antenna out terminal on the VCR.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

2

Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2 (L, R)”) jacks on the TV and AUDIO OUT jacks on the VCR.

If you have a mono VCR, connect L(mono) to

VCR audio out using only one audio cable.

3

Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the VCR.

Refer to your VCR’s instructions for more information about how to view your VCR tape.

• Also, you can connect to “AV IN 2” on the side panel of TV.

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the “AV OUT (L, R)” jacks on the TV and AUDIO IN jacks on the VCR.

The VCR input jacks might be either on the front or on back of the VCR.

2

Connect a video cable between the “AV OUT (VIDEO)” jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

English - 15

Image 15

Contents Owner’s Instructions English Your New TV InstallationUsing the PRE-CH Button to Select the Previous Channel Resetting the Picture Settings to the Factory DefaultsSpecial Features TroubleshootingAppendix Accessories List of FeaturesControl Buttons Indicator¨ Remote Control Sensor Familiarizing Yourself with the TVHeadphone Connection Jacks SideAudio Input ´ Video InputAudio Input jacks Connection Jacks RearAudio-Video Output jacks ¨ S-Video Input jack ´ Video Input jacksVOL +, VOL Remote Control´ Number buttons +100Installing Batteries in the Remote Control Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Separate VHF and UHF Antennas Antennas with 75-ohm Round LeadsConnecting Cable TV Connecting to a Cable Box that Descrambles All ChannelsCable without a Cable Box This terminal might be labelled ANT IN, VHF in or simply, Connecting to a Cable Box that Descrambles Some ChannelsConnecting a VCR Connecting a Second VCR to Record from the TVAlso, you can connect to AV in 2 on the side panel of TV Connecting a DVD Player Connecting to Y, PB, PRConnecting to Regular Audio and Video Jacks Connecting to an Analog Amplifier Connecting a CamcorderTurning the TV On and Off Plug & Play FeatureYou can also use the Power button on the front panel Plug & Play feature doesn’t work in the AV modeRefer to Setting the Clock on Viewing the Display Press the Info button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Memorizing the Channels Selecting the Video Signal SourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Changing Channels Using the Channel ButtonsUsing the Number Buttons Using the PRE-CH Button to Select the Previous ChannelLabelling the Channels You cannot select Name in the AV modeUsing Automatic Picture Settings Picture ControlPress the Enter button again Customizing the Picture Resetting the Picture Settings to the Factory Defaults Adjusting the Volume Using the Mute ButtonSound Control Using Automatic Sound Settings Customizing the Sound Select Equalizer, then Press the Enter buttonSelect the balance or a Setting the Clock Setting the Signal Source Viewing an External Signal SourcePress the Enter button Press the Exit button to exit Assigning Names to External Input ModeChapter Four Fine Tuning ChannelsChanging the Screen Size Digital Noise Reduction DNIe JrTM Digital Natural Image engine Viewing Picture-In-Picture depending on the model Activating the PIPPress the Enter button to select PIP Selecting an External Source Swapping the Sub Picture and Main PictureChanging the Size of the Sub Picture You can select the Prog. when the Source is set to TV Changing the Position of the Sub PictureChanging the Channel of the Sub Picture Using the R.Surf Feature Choosing a Multi-Channel Sound MTS track Auto Volume Setting the On/Off Timer Set the Off Timer as methods for On Timer settingYou must set the clock first Setting the Preferred Channel and Volume Level Setting the Sleep Timer Press the Enter button to select Caption Viewing Closed Captions On-Screen Text MessageCaption Mode Channel Field Move Enter Return Locking the Channel If you want to unlock a channel, set to OffPress the œ or √ button to select the channel to be locked Setting the Blue Screen Mode Setting the On/Off Melody Viewing the Demonstration Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications M O English English AA68-03671A-00

Related manuals

Manual 67 pages 25.38 Kb