Samsung CL21M21, CL21T21 Changing Channels, Using the Channel Buttons, Using the Number Buttons

Page 25

O P E R AT I O N

Changing Channels

Using the Channel Buttons

Press the CH or CH button to change channels.

When you press CH or CH , the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

Press the number buttons to go directly to a channel.

For example, to select channel 27, press “2” then “7”.

The TV will change channels when you press the second number.

When you use the number buttons, you can directly select channels that were either erased or not memorized.

To select a channel over 100, press the +100 button. (For channel 122, press “+100” then “2” then “2”.)

To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4” press “0” then “4”.)

Using the PRE-CH Button to Select the Previous Channel

Press the PRE-CHbutton. The TV changes to the last channel you were watching.

œTo quickly switch between two channels that are far apart, tune to one channel, then use the number buttons to select the second channel. Then, use the PRE-CHbutton to quickly alternate between them.

English - 25

Image 25

Contents Owner’s Instructions English Using the PRE-CH Button to Select the Previous Channel InstallationResetting the Picture Settings to the Factory Defaults Your New TVTroubleshooting Special FeaturesAppendix Accessories List of Features¨ Remote Control Sensor IndicatorFamiliarizing Yourself with the TV Control ButtonsAudio Input Connection Jacks Side´ Video Input HeadphoneAudio-Video Output jacks ¨ S-Video Input jack Connection Jacks Rear´ Video Input jacks Audio Input jacks´ Number buttons Remote Control+100 VOL +, VOLInstalling Batteries in the Remote Control Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasSeparate VHF and UHF Antennas Antennas with 75-ohm Round LeadsConnecting to a Cable Box that Descrambles All Channels Connecting Cable TVCable without a Cable Box This terminal might be labelled ANT IN, VHF in or simply, Connecting to a Cable Box that Descrambles Some ChannelsConnecting a Second VCR to Record from the TV Connecting a VCRAlso, you can connect to AV in 2 on the side panel of TV Connecting to Y, PB, PR Connecting a DVD PlayerConnecting to Regular Audio and Video Jacks Connecting to an Analog Amplifier Connecting a CamcorderYou can also use the Power button on the front panel Plug & Play FeaturePlug & Play feature doesn’t work in the AV mode Turning the TV On and OffRefer to Setting the Clock on Viewing the Menus and On-Screen Displays Press the Info button on the remote controlViewing the Menus Viewing the DisplaySelecting a Menu Language Memorizing the Channels Selecting the Video Signal SourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Using the Number Buttons Using the Channel ButtonsUsing the PRE-CH Button to Select the Previous Channel Changing ChannelsLabelling the Channels You cannot select Name in the AV modePicture Control Using Automatic Picture SettingsPress the Enter button again Customizing the Picture Resetting the Picture Settings to the Factory Defaults Using the Mute Button Adjusting the VolumeSound Control Using Automatic Sound Settings Select Equalizer, then Press the Enter button Customizing the SoundSelect the balance or a Setting the Clock Setting the Signal Source Viewing an External Signal SourcePress the Enter button Press the Exit button to exit Assigning Names to External Input ModeChapter Four Fine Tuning ChannelsChanging the Screen Size Digital Noise Reduction DNIe JrTM Digital Natural Image engine Activating the PIP Viewing Picture-In-Picture depending on the modelPress the Enter button to select PIP Swapping the Sub Picture and Main Picture Selecting an External SourceChanging the Size of the Sub Picture Changing the Position of the Sub Picture You can select the Prog. when the Source is set to TVChanging the Channel of the Sub Picture Using the R.Surf Feature Choosing a Multi-Channel Sound MTS track Auto Volume Set the Off Timer as methods for On Timer setting Setting the On/Off TimerYou must set the clock first Setting the Preferred Channel and Volume Level Setting the Sleep Timer Press the Enter button to select Caption Viewing Closed Captions On-Screen Text MessageCaption Mode Channel Field Move Enter Return If you want to unlock a channel, set to Off Locking the ChannelPress the œ or √ button to select the channel to be locked Setting the Blue Screen Mode Setting the On/Off Melody Viewing the Demonstration Chapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications M O English English AA68-03671A-00

Related manuals

Manual 67 pages 25.38 Kb