Samsung CL-29Z40MQ manual Memorizing the Channels, Selecting the Video Signal Source

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal Source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button

2

Press the ENTER button to select “Antenna”.

Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button.

3

Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button.

					Channel
	Antenna		: Air			√
	Auto Program					√
	Add/Delete					√
	Fine Tune					√
	Name					√
	Signal Strength					√
Move		Enter			Return
					Channel
	Antenna		:	Air
	Auto Program			Cable
	Add/Delete
	Fine Tune
	Name
	Signal Strength
Move		Enter			Return
					Channel
	Antenna		: Air			√
	Auto Program					√
	Add/Delete					√
	Fine Tune					√
	Name					√
	Signal Strength					√
Move		Enter			Return

continued...

English - 27