Samsung CL21K30MQ, CL21K30M16 manual Connecting VHF and UHF Antennas

Page 9

Chapter Two

I N S TA L L AT I O N

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page.

If you have two antennas, see “Separate

VHF and UHF Antennas” on next page.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

1

Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

2

Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.

9

Image 9

Contents Owner’s Instructions Installation Your New TVOperation Special Features TroubleshootingAppendix Chapter One List of Features« VOL , + Stand by indicator ‹ Remote Control SensorPower CH and CH Familiarizing Yourself with The TV Side Panel Jacks Devices For private listening Devices Rear Panel Jacks « Audio Inputs Input1DVD Audio Inputs Input2 « Number buttons Remote Control+100 VOL -, VOL +Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsIncoming Cable Splitter Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting a Second VCR to Record from the TV Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Press the Menu button to display the menuPress the Exit button to exit Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Directly Accessing Channels Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Changing ChannelsPress the Menu button to display menu Customizing the PictureUsing Automatic Picture Settings Adjusting the Volume Using MuteCustomizing the Sound Using Automatic Sound Settings Press the ˇ or ˆ buttonTo increase or decrease the value of a particular item Press the Menu button to display the on-screen menu Setting the ClockSimply press Viewing a VCR or Camcorder TapePress the ˇ and ˆ but- tons to adjust the fine tun- ing Fine Tuning ChannelsPress the or button to select Color Tone Selecting the Color ToneChanging the Screen Size Using the Surf Feature Press the or button to select MTS Choosing a Multi-Channel Sound MTS SoundtrackAuto Volume Extra Sound SettingsPM appears to the right of the hour Setting the On/Off TimerSetting the Sleep Timer Viewing Closed Captions Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications