Setting Up the Display Options
Troubleshooting Guide
Before requesting service (troubleshooting)
Problem
Action
Page
DISPLAY OPTIONS
1 | Tv Aspect | 4:3 |
2 | Still Mode | Auto |
3 | Screen Messages | On |
4 | Front Display | Auto |
5 | Black Level | Off |
|
|
|
|
|
|
| RETURN | ENTER |
|
|
|
NOTE
•How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
1 With no disc playing, press the SETUP button.
2 Use the UP/DOWN button to select DIS- PLAY OPTIONS. Then press the ENTER button.
3 Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT button.
TV ASPECT
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).
14:3 LETTER BOX :
Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
24:3
Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
316:9 WIDE :
You can view the full 16:9 picture on your widescreen TV.
STILL MODE
Prevent picture shaking in still mode and display small text clearer.
1FIELD : Select this feature when the screen shakes in the AUTO mode.
2FRAME : Select this feature when you want to see small letters more clearly in the AUTO mode.
3AUTO : When selecting AUTO, FIELD/FRAME mode will be automatically converted.
SCREEN MESSAGES
Use to turn
FRONT DISPLAY
Adjust the brightness of the unit’s front panel display.
1BRIGHT : Makes the Front Panel Display bright.
2DIM : Makes the Front Panel Display dim.
3AUTO DIM : Makes the Front Panel Display dim auto- matically when playing a DVD.
BLACK LEVEL
Adjusts the brightness of the screen.
No operations can be performed with remote.
Disc does not play.
5.1channel sound is not being reproduced.
The icon appears on screen.
Disc Menu doesn’t appear.
Playback mode differs from the Setup Menu selection.
The screen ratio can- not be changed.
No audio.
Forgot password
If you experience other problems.
•Check the batteries in the remote. May need replacing.
•Operate the remote control at a distance of no more than 20 feet.
•Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
•Ensure that the disc is installed with the label side facing up.
•Check the region number of the DVD.
•This player cannot play
•5.1 channel sound is reproduced only when the following conditions are met. :
1)The DVD player is connected with the proper amplifier 2)The disc is recorded with 5.1 channel sound.
•Check whether the disc being played has the “Dolby 5.1 ch” mark on the outside.
•Check if your audio system is connected and working properly.
•The features or action cannot be completed at this time because:
1.The DVD’s software restricts it.
2.The DVD’s software doesn’t support the feature (e.g., angles).
3.The feature is not available at the moment.
4.You’ve requested a title or chapter number or search time that is out of range.
•Check if the disc has a Menu.
•Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the correspond- ing function.
•The Screen Ratio is fixed on your DVDs.
•Make sure you have selected the correct Digital Output in the Audio Options Menu.
•Press power on from a cold start with no disc in the unit. Press the STOP and PLAY buttons simultaneously on the front panel for three seconds. The Select Menu Language display will appear. Select the desired language button. Press the SETUP button on the remote control to select the Parental Mode. The Parental Mode is now unlocked as indicated on the display. Press the DOWN button to select Parental. Press ENTER and the Create Password display will appear. You can now set your rating level and change your password to a new number.
•Go to the contents and find the section of the instruction book that contains the explanations regarding the current problem, and follow the procedure once again.
•If the problem still cannot be solved, please contact your nearest authorized service center.
P4
P7
P32
P31
P30
REFERENCE
32 | 33 |