![](/images/new-backgrounds/1215029/21502911x1.webp)
Description-Rear Panel
* *
Tour of the Remote Control
DVD-611
DIGITAL AUDIO OUT |
| ANALOG AUDIO OUT VIDEO OUT | COMPONENT VIDEO OUT |
OPTICAL COAXIAL
PrY
RL
Pb
VIDEO OUT
SELECT
Y, Pb, Pr
SETUP
DVD-511
DIGITAL | ANALOG AUDIO OUT VIDEO OUT | |
AUDIO OUT |
|
|
OPTICAL
RL
Rear Panel
DIGITAL AUDIO OUT JACK
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder. (For
ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
•Use a video cable to connect to the Video input jack on your television.
*: only DVD-611
•Use the
VIDEO OUT SELECT.
COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
VIDEO OUT SELECT SWITCH
•Use the switch to set video out.
•If Y, Pb or Pr is selected,
10 | 11 |