Switching Your Television On and Off
ENG
Power |
|
|
|
|
TV | VCR | Cable | DVD | SET |
The mains lead is attached to the rear of your television.
1Plug the mains lead into an appropriate socket.
➣The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the POWER ( I ) button on the front of the television.
Result: The Standby indicator on the front of the television lights up.
3Press the Power (
) button on the remote control to switch the television on.
Result: The programme that you were watching last is re- selected automatically.
➣If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 18 or “Storing Channels Manually” on page 20.
4To switch your television off, press the POWER ( I ) button again.
Placing Your Television in Standby Mode
Power |
|
|
|
|
TV | VCR | Cable | DVD | SET |
Your television can be placed in Standby mode, in order to reduce the power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1Press the Power (
) button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.
2To switch the television back on, simply press the Power (
) button again.
☛Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the POWER ( I ) button on the front of the television.
It is best to unplug the set from the mains and aerial.
12