Samsung HL-R5056W, HL-R6156W, HL-R5656W manual Customizing Your Remote Control, Dvd

Operation

Customizing Your Remote Control

Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).

NOTE

•The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up Your Remote Control to Operate Your VCR (Cable box or

DVD player)

1		Turn off your VCR (Cable box or DVD player).
2		Press the MODE button to switch the remote control to the VCR
		(CABLE or DVD) mode.
		The remote control has five modes: TV, STB, VCR, CABLE, and
		DVD.
	3	On your Samsung remote control, press the SET button.

4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.)

5 Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly.

If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player).

6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player).

NOTES

•When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate your VCR (or DVD player).

•When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons still control your TV’s volume.

English - 32

Downloaded from www.Manualslib.com manuals search engine