Samsung TX P1634 manual Incoming Cable Splitter

Page 14

I N S TA L L AT I O N

4

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Incoming

Cable

Splitter				RF (A/B)
		Cable Box		Switch
				Switch

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Incoming

Cable

Splitter				RF (A/B)
		Cable Box		Switch
				Switch

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

Incoming

Cable

Splitter		RF (A/B)	TV Rear
		Switch	TV Rear
	Cable Box	Switch
	Cable Box

After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

14

Image 14

Contents Owner’s Instructions Operation InstallationYour New TV Appendix Special FeaturesTroubleshooting List of Features AccessoriesPower CH and CH ‹ Remote Control Sensor« VOL , + Stand by indicator Familiarizing Yourself with The TVDevices Side Panel JacksDevices For private listening Connect to an antenna or to a cable TV system Rear Panel JacksDVD Video Input +100 Remote Control‹ Number buttons VOL -, VOL +Press to fast forward the tape in your VCR Remote Control VCR ControlsPress to rewind a tape in your VCR MTS Multichannel Television Stereo « Number buttonsSleep Up, Down, Left Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Incoming Cable Splitter Connecting a VCR Unplug the cable or antenna from the back of the TVConnecting an S-VHS VCR Depends on the model Connecting a DVD Player PlayerConnecting a Camcorder Installing Batteries in the Remote Control Viewing the Menus and On-Screen Displays Press the Power button on the remote controlTurning the TV On and Off Viewing the MenusPress the Exit button to exit Selecting a Menu LanguagePress the Menu button to display the menu Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Using the PRE-CH Button to select the Previous Channel Using the Channel ButtonsDirectly Accessing Channels Changing ChannelsCustomizing the Picture Press the Menu button to display menuUsing Automatic Picture Settings Customizing the Sound Adjusting the VolumeUsing Mute To increase or decrease the value of a particular item Using Automatic Sound SettingsPress the ˇ or ˆ button Setting the Clock Press the Menu button to display the on-screen menuViewing a VCR or Camcorder Tape Simply pressFine Tuning Channels Press the ˇ and ˆ but- tons to adjust the fine tun- ingSelecting the Color Tone Press the or button to select Color ToneChanging the Screen Size Using the Surf Feature Choosing a Multi-Channel Sound MTS Soundtrack Press the or button to select MTSExtra Sound Settings Auto VolumeSetting the On/Off Timer PM appears to the right of the hourSetting the Sleep Timer Viewing Closed Captions Button Using the V-ChipSetting Up Your Personal ID Number PIN How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesV-chip screen will To select the V-chipDigit PIN number Appear. Press the orE C I a L F E AT U R E S General audience no restrictions Repeatedly press the or AppearSelect Mpaa rat- ing Customizing Your Remote Control Depends on the model VCR Codes RCAIdentifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country M O M O