Samsung TX-P2028, TX-P2030, TX-P2034, TX-P2036, TX-P1430, TX-P1634, TX P1634 manual

Page 13

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

Incoming Cable

Splitter

Cable Box

13

Image 13

Contents Owner’s Instructions Your New TV InstallationOperation Troubleshooting Special FeaturesAppendix Accessories List of Features« VOL , + Stand by indicator ‹ Remote Control SensorPower CH and CH Familiarizing Yourself with The TVDevices For private listening Side Panel JacksDevices DVD Video Input Rear Panel JacksConnect to an antenna or to a cable TV system ‹ Number buttons Remote Control+100 VOL -, VOL +Press to rewind a tape in your VCR Remote Control VCR ControlsPress to fast forward the tape in your VCR Sleep « Number buttons MTS Multichannel Television Stereo Up, Down, LeftAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Incoming Cable Splitter Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting an S-VHS VCR Depends on the model Player Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusPress the Menu button to display the menu Selecting a Menu LanguagePress the Exit button to exit Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Directly Accessing Channels Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Changing ChannelsPress the Menu button to display menu Customizing the PictureUsing Automatic Picture Settings Using Mute Adjusting the VolumeCustomizing the Sound Press the ˇ or ˆ button Using Automatic Sound SettingsTo increase or decrease the value of a particular item Press the Menu button to display the on-screen menu Setting the ClockSimply press Viewing a VCR or Camcorder TapePress the ˇ and ˆ but- tons to adjust the fine tun- ing Fine Tuning ChannelsPress the or button to select Color Tone Selecting the Color ToneChanging the Screen Size Using the Surf Feature Press the or button to select MTS Choosing a Multi-Channel Sound MTS SoundtrackAuto Volume Extra Sound SettingsPM appears to the right of the hour Setting the On/Off TimerSetting the Sleep Timer Viewing Closed Captions Setting Up Your Personal ID Number PIN Using the V-ChipButton How to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-ChipDigit PIN number To select the V-chipV-chip screen will Appear. Press the orE C I a L F E AT U R E S Select Mpaa rat- ing AppearGeneral audience no restrictions Repeatedly press the or Customizing Your Remote Control Depends on the model RCA VCR CodesChapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications M O M O