COLOUR TELEVISION
CS29Z40 / CS29Z45 / CS29Z47 / CS29Z50 /
CS29Z57 / CS29Z58 / CS29A730 /
CS29A760 / CS29A750
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
Control Panel (depending on the model)
➢The actual configuration of your TV may be different, depending on your model.
Front (or Side) Panel
1
2Volume adjustment
3Channel selection
4Remote control sensor
5Standby indicator
6Power on/off
You can use the 3 buttons to switch the TV on when it is in standby mode depending on the model.
The 2 and 3 buttons also have the same function as the ◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.
Connection Panel (depending on the model)
➢The actual configuration of your TV may be different, depending on your model.
Rear Panel |
|
|
|
| or |
|
| cable television |
|
| network |
AV IN / OUT | COMPONENTIN | |
VIDEO | L - AUDIO - R | (480i/480p/576i/576p/� |
720p/080i/080p) | ||
OUT |
| Y |
IN 2 |
| PB |
IN |
| PR |
|
| or |
|
| cable television |
|
| network |
☛Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω coaxial socket).
To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.
English -
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a recording VCR or audio system.
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the
The RCA5 connectors are used for equipment such as a DVD with component output (480i only).
Front (or Side) Panel
1
2 Video input
3 Audio input
☛Please be sure to match the colour coded input terminals and cable jacks.
Connecting to the RCA Input
The 3
Connecting to the
The 1
➢When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority.