Samsung TX-S3079WH, TX-S3080WH, TX S3080WH manual Connecting Cable TV, Cable without a Cable Box

Page 9

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1.Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Connecting to a Cable Box that Descrambles All Channels

ANT IN

ANT OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2.Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

ANT IN

Incoming

cableSplitter

1.Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2.Connect this cable to a two-way splitter.

Incoming

cableSplitter

Cable Box

3.Connect an Antenna cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

4.Connect an Antenna cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch.

Incoming

cable

Splitter

 

RF (A/B)

Cable Box

Switch

5.Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch.

Incoming

 

 

cable

Splitter

RF (A/B)

 

 

 

 

Cable Box

Switch

TV Rear

ANT 2 IN (CABLE)

6.Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the back of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English-9

Image 9
Contents Owner’s Instructions English-2 Contents Accessories List of FeaturesSafety Guide Manual General InformationRemote Control Sensor Power IndicatorViewing the Control Panel + VOLViewing the Connection Panel Upgrade Port USB For service onlyRear Panel Jacks Hdmi INTX-S3079WH Hdmi 1, 2 INTX-S3080WHRemote Control Connecting VHF and UHF Antennas Installing Batteries in the Remote ControlIf the remote control doesn’t work, check the following ConnectionsConnecting to a Cable Box that Descrambles All Channels Connecting Cable TVConnecting to a Cable Box that Descrambles Some Channels Cable without a Cable BoxConnecting a VCR Connecting an S-VHS VCREnglish-10 Connecting a Second VCR to Record from the TV Connecting a CamcorderConnecting a DVD Player/Set-Top Box Connecting a Digital Audio System Connecting a DVD Player/Set-Top Box via HdmiWhat is HDMI? English-12Plug & Play Feature Connecting an Amplifier/DVD Home TheaterOperation Turning the TV On and OffTV will begin memorizing all of the available channels Setting the Clock AutomaticallyClock Mode. menu is automatically displayed Press the Enter buttonChanging Channels Using Mute Button Adjusting the VolumeViewing the Display Viewing the MenusMemorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Press the Menu button to display the menuSetting Up the Remote control to Operate Your Cable Box Setting Up Your Remote ControlSetting Up the Remote control to Operate Your Set Top Box Setting Up the Remote control to Operate Your DVDBrand Code Remote Control CodesProduct Code BD Record 005 000 001007 008 009 010 VCR Record 012To Edit the Input Source Name To Select the SourceThen press the Enter button VOD STB, or TV input source, then press the Enter buttonPicture Control Using Automatic Picture SettingsEnglish-24 PictureViewing with a 43 signal When a 43 signal is received Resetting the Picture Settings to the Factory DefaultsChanging the Screen Size Screen size selection depends on the type of video inputUsing Automatic Sound Settings Setting the Film ModeSound Control TiltSound Balance Adjustment Setting the SRS TruSurround XTBandwidth Adjustment 100Hz, 300Hz, 1KHz, 3KHz, 10KHz Customizing the SoundReduces the differences in volume level among broadcasters Automatic Volume ControlChoosing a Multi-Channel Sound MTS track Digital English-28Setting the On/Off Melody Choosing a Multi-Channel Sound MTS track AnalogEnglish-29 Adding and Erasing Channels Selecting the AntennaEnglish-30 Channel ManagerTo set-up Your Favorite Channels You can set channels you watch frequently as favoritesEnglish-31 Setting the Default Channel List Mode Viewing the Channel ListsEnglish-32 Labeling Channels Fine Tuning Analog ChannelsEnglish-33 NameUsing the R.Surf Feature Checking the Digital-Signal StrengthYour antenna to increase the signal strength SignalSetting the Time Time SettingOption 1 Setting the Clock Manually English-35Setting the On/Off Timer Option 2 Setting the Clock AutomaticallyEnglish-36 Time ZoneSetting the Sleep Timer To cancel the set sleep timerEnglish-37 Setting Up Your Personal ID Number PIN Using the V-ChipFunction Description Selecting a Menu LanguageEnglish-39 How to Set up Restrictions Using the TV Parental GuidelinesHow to set the FV, V, S, L and D sub-ratings English-40TV Parental Guidelines Mpaa Rating English-41How to Set up Restrictions Using the ‘Canadian English’ English-42Canadian English How to Set up Restrictions Using the ‘Canadian French’ English-43Canadian French Using the V-Chip for Digital channel English-44Downloadable U.S. Rating Digital Captions function operates on digital channels Viewing Closed CaptionsOn-Screen Text Messages DigitalEnglish-45 CaptionEnglish-46 Viewing Closed CaptionsOn-Screen Text Messages AnalogSetting the Function Help Setting the Blue Screen ModeMenu Transparency Level Displays help on the menu functionsSpecifications Identifying ProblemsProblem Possible Solution English-48This page is intentionally Left blank This page is intentionally Left blank This page is intentionally Left blank Contact Samsung WORLD-WIDE